Website: www.adam-tech.com
Mail: info@adam-tech.com
100G Base SR4 100m QSFP28
Optical Transceiver Module TVEQSFP28SR4-1
Features
⚫
⚫
Compliant to the industry
standard SFF-8636 and SFF-
8679 Specification
4* 25, 100 Gbps per module, bi-directional
operation
Description
TVEQSFP28SR4-1 transceiver is a Parallel
⚫
⚫
⚫
4 channels 850nm VCSEL array
4 channels PIN photo detector array
DDM function implemented
100Gb/s Quad Small Form-factor, Hot-Pluggable
optical module.
The module integrates 4 independent
transmitters and 4 independent receivers inside.
Four-channel 850nm VCSEL array, PIN array ,
amplifier and Driver are used in the module for
compact size, low power consumption and low cost.
Each channel can operate at 25Gbps up to 70m
using OM3 fiber.
⚫
⚫
Up to 70m on OM3 MMF and 100m on OM4 MMF
Hot Pluggable QSFP28 form factor
⚫
⚫
⚫
Single +3.3V power supply
Operating case temperature: 0~+70°C; -40~85°C
RoHS-6 compliant (lead-free)
The transceiver is compliant to the industry
standard SFF-8636 QSFP28 Transceiver
Specification. Digital diagnostic function is provided to
monitor the working state of the module. The
electrical interface uses a 38 contact edge type
connector. The optical interface uses an 8 or 12 fiber
MTP (MPO)connector.
Applications
⚫
⚫
⚫
⚫
100GBASE-SR4 100G Ethernet
InfiniBand QDR (4 x 25G) interconnects
Datacom/Telecom Switch & Router connections
TVEQSFP28SR4-1 transceiver features small
size, parallel multi- channel, hot-pluggable, low power
and high speed operation. It’s very suitable for high
speed short-distance density data connections such
as 100G BASE-SR4, InfiniBand QDR, Switch &
Route interconnects etc.
High speed multi-channel parallel data
connections
Compliance
⚫
⚫
⚫
IEEE802.3bm 100GBASE-SR4
SFF-8636 Specification
SFF-8679 Specification
Ordering Information
Specification
Part No
Pack
Rate
Tx
Pout
Rx
S
Top
Reach
Others
0~70
℃
TVEQSFP28SR4-1
QSFP 28 100G 850nmVCSEL -8.4~2.4dBm PIN <-8.5 dBm
100m
DDM/RoHS
Rev.1.0
- 1 -