TS1910A
680kHz/1.2MHz High Voltage Boost Converter
SOP-8EP
Pin Definition:
1. COMP
2. FB
8. SS
7. FREQ
3. EN
4. GND
6. VCC
5. LX
General Description
The TS1910A is a high performance, high efficiency step up DC-DC Converter with integrated 2A. The TS1910A
converter input voltage ranging from 2.6 to 5.5V. The Output voltage can be set up to 27V. The selectable
frequency of 680kHz and 1.2MHz allows the use of small external inductors and capacitors and provides fast
transient response. Current mode control with external compensation network makes it easy to stabilize the
system and keep maximum flexibility. Programmable soft start function minimizes impact on the input power
system. Internal power MOSFET with very low RDS(ON) provides high efficiency. The TS1910A automatically
transits from PWM to PFM during light load condition further increasing efficiency. The converter also provides
protection functions such as Current Limit and Thermal shutdown.
Features
Application
●
●
●
●
●
●
●
●
●
2.6V to 5.5V operating input voltage range
●
●
●
●
Digital Still Cameras
Adjustable output voltage range up to 27V
Up to 3A output switch current
Portable Electronics
PDA’s and Palm-Top Computers
Local Boost Regulator
680K/1.2MHz Selectable Switching Frequency
Programmable soft-start function
External Compensation Network
Current limit and Thermal shutdown protection
Under voltage Lockout
≤1µA Shutdown Current
Ordering Information
Part No.
Package
Packing
TS1910ACS RLG SOP-8EP
2.5Kpcs / 13” Reel
Note: “G” denotes for Halogen Free
Absolute Maximum Rating
Parameter
Symbol
Limit
Unit
V
VCC Pin Voltage
VCC
GND - 0.3 to GND + 6
EN, FREQ,COMP,FB,SS, Pin Voltage
LX Pin Voltage
GND - 0.3 to VCC + 0.3
V
VLX
PD
TST
TOP
θJC
θJA
30
( TJ-TA ) / θJA
-65 to +150
-40 to +125
15
V
Power Dissipation
mW
°C
Storage Temperature Range
Operating Junction Temperature Range
Thermal Resistance from Junction to case
Thermal Resistance from Junction to ambient
°C
°C/W
°C/W
40
Note: θJA is measured with the PCB copper area of approximately 1.5 in2(Multi-layer). That copper area needs
connect to exposed pad.
1/8
Version: A12