Optoway
TRSL-7350W / TRSL-7350AW
*******************************************************************************************************************************************************************************
TRSL-7350W / TRSL-7350AW
3.3V / 1550 nm / 1.25 Gbps SFF LC 2X10 SINGLE-MODE TRANSCEIVER
******************************************************************************************************************************************************************************
FEATURES
DESCRIPTION
lDuplex LC Single Mode Transceiver
lCompliant with IEEE 802.3z 1000BASE-XD
lCompliant with Fiber Channel 1X SM-LC-L FC-PI
lSmall Form Factor, RJ-45 size, 2X10 pin Package
l1550 nm DFB LD Transmitter
The TRSL-7350W series single mode transceivers is small
form factor, low power, high performance module for
bi-directional serial optical data communications such as
IEEE 802.3z Gigabit Ethernet 1000BASE-LX and Fiber
Channel 1X SM-LC-L FC-PI. This module is designed for
single mode fiber and operates at a nominal wavelength of
1550 nm. A guaranteed minimum optical link budget of 19
dB is offered which can correspond to a link distance of
over 50 km (assuming worst case fiber loss of 0.3 dB/km).
The transmitter section uses a multiple quantum well
laser and is a class 1 laser compliant according to
International Safety Standard IEC-60825. The receiver
section uses an integrated InGaAs detector preamplifier
(IDP) mounted in an optical header and a limiting
post-amplifier IC. A LVPECL logic interface simplifies
interface to external circuitry.
l19 dB Power Budget at Least
lAnalog Monitor Function
-- Transmitter Laser Bias Current
-- Transmitter Laser Optical Power Monitor
-- Receiver Photo Detector Current
lAC/AC Coupled Signal Input / Output
lLVTTL Transmitter Disable Input
lLVTTL Signal Detection Output
lSingle +3.3 V Power Supply
l0 to 70oC Operation (TRSL-7350W)
l-20 to 85oC Operation (TRSL-7350AW)
lWave Solderable and Aqueous Washable
lClass 1 Laser International Safety Standard IEC-60825
Compliant
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
APPLICATIONS
lGigabit Ethernet Switches and Routers
lFiber Channel Switch Infrastructure
lXDSL Applications
ORDER INFORMATION
P/No.
Bit Rate
(Gb/s)
1000
BASE
XD
XD
Distance Wavelengt Package
Temp. TX Power RX Sens.
Signal
Detection
LVTTL
(km)
h (nm)
(oC)
(dBm)
0 to -5
0 to -5
(dBm)
-24
-24
TRSL-7350W
TRSL-7350AW
1.25/1.063
1.25/1.063
50
1550 DFB 2X10 LC
0 to 70
50
1550 DFB 2X10 LC -20 to 85
Absolute Maximum Ratings
Parameter
Symbol
Min
Max
85
Units
Notes
Storage Temperature
Operating Temperature
Tstg
Topr
-40
0
oC
oC
70
TRSL-7350W
-20
85
TRSL-7350AW
10 seconds on leads only
Soldering Temperature
Power Supply Voltage
Input Voltage
---
Vcc
---
260
4.5
Vcc
oC
V
0
GND
0
V
Output Current
Iout
30
mA
Recommended Operating Conditions
Parameter
Power Supply Voltage
Operating Temperature
Symbol
Min
3.135
0
Typ
Max
3.465
70
Units / Notes
Vcc
Topr
3.3
V
oC / TRSL-7350W
oC / TRSL-7350AW
Mb/s
-20
85
Data Rate
Power Supply Current
1000
1250
200
Icc
300
mA
*******************************************************************************************************************************************************************************
No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
OPTOWAY TECHNOLOGY INC.
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
6/30/2004 V2.0