1
Optoway
TRSL-5380G
***********************************************************************************************************************************************************************
TRSL-5380G / TRSL-5380AG / TRSL-5380CG / TRSL-5380ACG
3.3V / 1550 nm / 622 Mbps RoHS Compliant SFF LC SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Duplex LC Single Mode Transceiver
l SONET OC-12 LR-2 / SDH STM-4 (L-4.2) Compliant
l Small Form Factor, RJ-45 size, 2X5 pin Package
l 1550 nm DFB LD Transmitter
The TRSL-5380G series single mode transceivers is small
form factor, low power, high performance module for
bi-directional serial optical data communications such as
SONET OC-12 LR-2 / SDH STM-4 (L-4.2) and Fiber
Channel. This module is designed for single mode fiber and
operates at a nominal wavelength of 1550 nm. A guaranteed
minimum optical link budget of 26 dB is offered which can
correspond to a link distance of over 80 km (assuming worst
case fiber loss of 0.25 dB/km). The transmitter section
uses a multiple quantum well 1550 nm DFB laser and is a
class 1 laser compliant according to International Safety
Standard IEC-60825. The receiver section uses an
integrated InGaAs detector preamplifier (IDP) mounted in
an optical header and a limiting post-amplifier IC. A PECL
logic interface simplifies interface to external circuitry.
l 26 dB Link Power Budget at Least
l LVPECL Signal Input / Output
l LVTTL Transmitter Disable Input
l LVPECL Signal Detect Output: TRSL-5380G
l LVTTL Signal Detect Output: TRSL-5380CG
l Single +3.3 V Power Supply
l 0 to 70oC Operating: TRSL-5380G
l -20 to 85oC Operating : TRSL-5380AG
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC-60825
Compliant
LASER SAFETY
APPLICATIONS
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
l ATM 622 Mbps Links
l SONET/SDH Equipment Interconnect
l Fiber Channel 533 Mb/s Links
ORDER INFORMATION
P/No.
Bit Rate
(Mb/s)
622
SONET
/SDH
LR-2/L-4.2
LR-2/L-4.2
Distance Wavelength Package
Temp. TX Power RX Sens.
RoHS
(km)
(nm)
(oC)
(dBm)
2 to -3
2 to -3
(dBm) Compliant
-29
-29
TRSL-5380G
80
80
1550 DFB
1550 DFB
2X5 LC
2X5 LC -20 to 85
0 to 70
Yes
Yes
TRSL-5380AG
622
Absolute Maximum Ratings
Parameter
Symbol
Tstg
Min
Max
Units
oC
oC
Notes
Storage Temperature
Operating Temperature
-40
0
85
70
Topr
TRSL-5380G
-20
85
TRSL-5380AG/air flow 1m/sec
10 seconds on leads only
Soldering Temperature
Power Supply Voltage
Input Voltage
---
Vcc
---
260
4.5
Vcc
oC
V
0
GND
0
V
Output Current
Iout
30
mA
Recommended Operating Conditions
Parameter
Symbol
Min
3.13
0
-20
50
Typ
Max
3.47
70
Units / Notes
Power Supply Voltage
Operating Temperature
Vcc
Topr
3.3
V
oC / TRSL-5380G
85
oC / TRSL-5380AG/air flow 1m/sec
Data Rate
Power Supply Current
622
200
Mb/s
mA
Icc
300
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
12/1/2005 V2.0