1
Optoway
TRSL-5140WG
***********************************************************************************************************************************************************************
TRSL-5140WG / TRSL-5140AWG
3.3V / 1310 nm / 622 Mbps RoHS Compliant SFF LC 2X10 SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Duplex LC Single Mode Transceiver
l SONET OC-12 LR-1 / SDH STM-4 (L-4.1) Compliant
l Small Form Factor, RJ-45 size, 2X10 pin Package
l 1310 nm LD Transmitter
The TRSL-5140WG series single mode transceivers is
small form factor, low power, high performance module for
bi-directional serial optical data communications such as
SONET OC-12 LR-1 / SDH STM-4 (L-4.1) and Fast
Ethernet. This module is designed for single mode fiber and
operates at a nominal wavelength of 1310 nm. A guaranteed
minimum optical link budget of 25 dB is offered which can
correspond to a link distance of over 40 km (assuming worst
case fiber loss of 0.45 dB/km). The transmitter section
uses a 1310 nm multiple quantum well DFB laser and is a
class 1 laser compliant according to International Safety
Standard IEC-60825. The receiver section uses an
integrated InGaAs detector preamplifier (IDP) mounted in
an optical header and a limiting post-amplifier IC. A PECL
logic interface simplifies interface to external circuitry.
l 25 dB Link Budget at Least
l Analog Monitor Function
-- Transmitter Laser Bias Current
-- Transmitter Laser Optical Power Monitor
-- Receiver Photo Detector Current
l LVPECL Signal Input / Output
l LVTTL Transmitter Disable Input
l LVTTL Signal Detection Output
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70oC Operation: TRSL-5140WG
l -40 to 85oC Operation: TRSL-5140WG
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC 60825
Compliant
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC 60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
APPLICATIONS
l ATM 622 Mbps Links
l SONET/SDH Equipment Interconnect
l Fiber Channel 533 Mb/s Links
ORDER INFORMATION
P/No.
Bit Rate
(Mb/s)
SONET
/SDH
Distance Wavelength Package
Temp. TX Power RX Sens.
RoHS
(km)
(nm)
(oC)
(dBm)
2 to -3
2 to -3
(dBm) Complaint
-28
-28
TRSL-5140WG
TRSL-5140AWG
622
622
LR-1/L-4.1
LR-1/L-4.1
40
1310
2X10 LC 0 to 70
Yes
Yes
40
1310 DFB 2X10 LC -40 to 85
Absolute Maximum Ratings
Parameter
Symbol
Tstg
Min
-40
0
Max
85
Units
oC
oC
Notes
Storage Temperature
Operating Temperature
Topr
70
TRSL-5140WG
-20
85
TRSL-5140AWG/air flow 1m/sec
10 seconds on leads only
Soldering Temperature
Power Supply Voltage
Input Voltage
---
Vcc
---
260
4.5
Vcc
oC
V
0
GND
0
V
Output Current
Iout
30
mA
Recommended Operating Conditions
Parameter
Power Supply Voltage
Operating Temperature
Symbol
Vcc
Min
3.13
0
-20
50
Typ
Max
3.47
70
Units / Notes
3.3
V
Topr
oC / TRSL-5140WG
85
oC / TRSL-5140AWG/air flow 1m/sec
Data Rate
622
200
Mb/s
mA
Power Supply Current
Icc
300
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
12/1/2005 V2.0