1
Optoway
TRSL-5140G
***********************************************************************************************************************************************************************
TRSL-5140G / TRSL-5140CG / TRSL-5140AG / TRSL-5140ACG
3.3V / 1310 nm / 622 Mbps RoHS Compliant SFF LC SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Duplex LC Single Mode Transceiver
l SONET OC-12 LR-1 / SDH STM-4 (L-4.1) Compliant
l Small Form Factor, RJ-45 size, 2X5 pin Package
l 1310 nm LD Transmitte
The TRSL-5140G series single mode transceivers is small
form factor, low power, high performance module for
bi-directional serial optical data communications such as
SONET OC-12 LR-1 / SDH STM-4 (L-4.1) and Fiber
Channel. This module is designed for single mode fiber and
operates at a nominal wavelength of 1310 nm. A guaranteed
minimum optical link budget of 25 dB is offered which can
correspond to a link distance of over 40 km (assuming worst
case fiber loss of 0.45 dB/km). The transmitter section
uses a multiple quantum well laser and is a class 1 laser
compliant according to International Safety Standard
IEC-60825. The receiver section uses an integrated InGaAs
detector preamplifier (IDP) mounted in an optical header
and a limiting post-amplifier IC. A PECL logic interface
simplifies interface to external circuitry.
l LVPECL Signal Input / Output
l LVTTL Transmitter Disable Input
l LVPECL Signal Detection Output : TRSL-5140G
l LVTTL Signal Detection Output : TRSL-5140CG
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70oC Operation: TRSL-5140G
l -40 to 85oC Operation: TRSL-5140AG
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC-60825
Compliant
LASER SAFETY
APPLICATIONS
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
l ATM 622 Mbps Links
l SONET/SDH Equipment Interconnect
l Fiber Channel 533 Mb/s Links
ORDER INFORMATION
P/No.
Bit Rate
(Mb/s)
622
SONET
/SDH
LR-1/L-4.1
LR-1/L-4.1
Distance Wavelength Package
Temp. TX Power RX Sens.
RoHS
Compliant
Yes
(km)
(nm)
(oC)
(dBm)
2 to -3
2 to -3
(dBm)
-28
-28
TRSL-5140G
40
1310
2X5 LC
0 to 70
TRSL-5140AG
622
40
1310 DFB
2X5 LC -40 to 85
Yes
Absolute Maximum Ratings
Parameter
Symbol
Tstg
Min
Max
85
Units
Notes
Storage Temperature
Operating Temperature
-40
0
oC
oC
Topr
70
TRSL-5140G
-40
85
TRSL-5140AG
10 seconds on leads only
Soldering Temperature
Power Supply Voltage
Input Voltage
---
Vcc
---
260
4.5
Vcc
oC
V
0
GND
0
V
Output Current
Iout
30
mA
Recommended Operating Conditions
Parameter
Power Supply Voltage
Operating Temperature
Symbol
Min
3.13
0
-40
50
Typ
Max
3.47
70
Units / Notes
Vcc
Topr
3.3
V
oC / TRSL-5140G
oC / TRSL-5140AG
Mb/s
85
Data Rate
622
Power Supply Current
Icc
240
mA
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
12/1/2005 V2.0