5秒后页面跳转
TRS3318CPWR PDF预览

TRS3318CPWR

更新时间: 2024-09-25 03:58:31
品牌 Logo 应用领域
德州仪器 - TI 线路驱动器或接收器驱动程序和接口接口集成电路光电二极管
页数 文件大小 规格书
17页 342K
描述
2.5-V 460-kbps RS-232 TRANSCEIVER WITH 【15-kV ESD PROTECTION

TRS3318CPWR 技术参数

是否无铅: 含铅是否Rohs认证: 符合
生命周期:Obsolete零件包装代码:TSSOP
包装说明:TSSOP-20针数:20
Reach Compliance Code:unknownECCN代码:EAR99
HTS代码:8542.39.00.01Factory Lead Time:1 week
风险等级:5.26Is Samacsys:N
差分输出:NO驱动器位数:2
输入特性:SCHMITT TRIGGER接口集成电路类型:LINE TRANSCEIVER
接口标准:EIA-232JESD-30 代码:R-PDSO-G20
长度:6.5 mm功能数量:2
端子数量:20最高工作温度:70 °C
最低工作温度:最小输出摆幅:7.4 V
最大输出低电流:0.0005 A封装主体材料:PLASTIC/EPOXY
封装代码:TSSOP封装等效代码:TSSOP20,.25
封装形状:RECTANGULAR封装形式:SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
峰值回流温度(摄氏度):NOT SPECIFIED电源:2.25/3 V
认证状态:Not Qualified最大接收延迟:
接收器位数:2座面最大高度:1.2 mm
子类别:Line Driver or Receivers最大压摆率:2 mA
最大供电电压:3 V最小供电电压:2.25 V
标称供电电压:2.5 V表面贴装:YES
温度等级:COMMERCIAL端子形式:GULL WING
端子节距:0.65 mm端子位置:DUAL
处于峰值回流温度下的最长时间:NOT SPECIFIED宽度:4.4 mm
Base Number Matches:1

TRS3318CPWR 数据手册

 浏览型号TRS3318CPWR的Datasheet PDF文件第2页浏览型号TRS3318CPWR的Datasheet PDF文件第3页浏览型号TRS3318CPWR的Datasheet PDF文件第4页浏览型号TRS3318CPWR的Datasheet PDF文件第5页浏览型号TRS3318CPWR的Datasheet PDF文件第6页浏览型号TRS3318CPWR的Datasheet PDF文件第7页 
TRS3318  
2.5-V 460-kbps RS-232 TRANSCEIVER  
WITH ±15-kV ESD PROTECTION  
www.ti.com  
SLLS820AUGUST 2007  
1
FEATURES  
DB OR PW PACKAGE  
(TOP VIEW)  
ESD Protection for RS-232 I/O Pins  
±15 kV Human-Body Model (HBM)  
READY  
C1+  
1
2
3
4
5
6
7
8
9
10  
20 FORCEOFF  
±8 kV IEC 61000-4-2, Contact Discharge  
±8 kV IEC 61000-4-2, Air-Gap Discharge  
19  
18  
17  
16  
15  
14  
13  
12  
11  
VCC  
GND  
V+  
300-μA Operating Supply Current  
C1−  
C2+  
DOUT1  
RIN1  
1-μA Low-Power Standby (With Receivers  
Active) Mode  
C2−  
ROUT1  
FORCEON  
DIN1  
Designed to Transmit at a Data Rate of  
460 kbps  
V−  
DOUT2  
RIN2  
ROUT2  
DIN2  
INVALID  
Auto-Powerdown Plus Option Features  
Flexible Power-Saving Mode  
Operates From a Single 2.25-V to 3-V VCC  
Supply  
APPLICATIONS  
Battery-Powered Systems  
PDAs  
Cellular Phones  
Notebooks  
Hand-Held Equipment  
Pagers  
DESCRIPTION/ORDERING INFORMATION  
The TRS3318 is  
a dual-driver, dual-receiver, RS-232 compatible transceiver. The device features  
auto-powerdown plus and enhanced electrostatic discharge (ESD) protection integrated into the chip. Driver  
output and receiver input are protected to ±8 kV using the IEC 61000-4-2 Air-Gap Discharge method, ±8 kV  
using the IEC 61000-4-2 Contact Discharge method, and ±15 kV using the Human-Body Model (HBM).  
The device operates at a data rate of 460 kbps. The transceiver has a proprietary low-dropout driver output stage  
enabling RS-232-compatible operation from a 2.25-V to 3-V supply with a dual charge pump. The charge pump  
requires only four 0.1-μF capacitors and features a logic-level output (READY) that asserts when the charge  
pump is regulating and the device is ready to begin transmitting.  
The TRS3318 achieves a 1-μA supply current using the auto-powerdown feature. This device automatically  
enters a low-power power-down mode when the RS-232 cable is disconnected or the drivers of the connected  
peripherals are inactive for more than 30 s. The device turns on again when it senses a valid transition at any  
driver or receiver input. Auto-powerdown saves power without changes to the existing BIOS or operating system.  
This device is available in two space-saving packages: 20-pin SSOP and 20-pin TSSOP.  
Flexible control options for power management are featured when the serial port and driver inputs are inactive.  
The auto-powerdown plus feature functions when FORCEON is low and FORCEOFF is high. During this mode of  
operation, if the device does not sense valid signal transitions on all receiver and driver inputs for approximately  
30 s, the built-in charge pump and drivers are powered down, reducing the supply current to 1 μA. By  
disconnecting the serial port or placing the peripheral drivers off, auto-powerdown plus can be disabled when  
FORCEON and FORCEOFF are high. With auto-powerdown plus enabled, the device activates automatically  
when a valid signal is applied to any receiver or driver input. INVALID is high (valid data) if any receiver input  
voltage is greater than 2.7 V or less than –2.7 V, or has been between –0.3 V and 0.3 V for less than 30 μs  
(typical number). INVALID is low (invalid data) if all receiver input voltage are between –0.3 V and 0.3 V for more  
than 30 μs (typical number).  
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of  
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.  
PRODUCTION DATA information is current as of publication date.  
Copyright © 2007, Texas Instruments Incorporated  
Products conform to specifications per the terms of the Texas  
Instruments standard warranty. Production processing does not  
necessarily include testing of all parameters.  

与TRS3318CPWR相关器件

型号 品牌 获取价格 描述 数据表
TRS3318CPWRG4 TI

获取价格

2.5-V 460-kbps RS-232 TRANSCEIVER WITH 【15-kV
TRS3318E TI

获取价格

2.5-V 460-kbps RS-232 TRANSCEIVER WITH 【15-kV
TRS3318E_10 TI

获取价格

2.5-V 460-kbps RS-232 TRANSCEIVER WITH ±15-k
TRS3318ECDB TI

获取价格

2.5-V 460-kbps RS-232 TRANSCEIVER WITH 【15-kV
TRS3318ECDBG4 TI

获取价格

2.5-V 460-kbps RS-232 TRANSCEIVER WITH 【15-kV
TRS3318ECDBR TI

获取价格

2.5-V 460-kbps RS-232 TRANSCEIVER WITH 【15-kV
TRS3318ECDBRG4 TI

获取价格

2.5-V 460-kbps RS-232 TRANSCEIVER WITH 【15-kV
TRS3318ECPW TI

获取价格

2.5-V 460-kbps RS-232 TRANSCEIVER WITH 【15-kV
TRS3318ECPWG4 TI

获取价格

2.5-V 460-kbps RS-232 TRANSCEIVER WITH 【15-kV
TRS3318ECPWR TI

获取价格

2.5-V 460-kbps RS-232 TRANSCEIVER WITH 【15-kV