5秒后页面跳转
TRS3221ECDBRG4 PDF预览

TRS3221ECDBRG4

更新时间: 2024-11-21 03:58:31
品牌 Logo 应用领域
德州仪器 - TI 线路驱动器或接收器驱动程序和接口接口集成电路光电二极管
页数 文件大小 规格书
16页 345K
描述
3-V TO 5.5-V SINGLE-CHANNEL RS-232 LINE DRIVER/RECEIVER WITH 【15-kV IEC ESD PROTECTION

TRS3221ECDBRG4 技术参数

是否Rohs认证:符合生命周期:Obsolete
零件包装代码:SOIC包装说明:SSOP-16
针数:16Reach Compliance Code:compliant
ECCN代码:EAR99HTS代码:8542.39.00.01
风险等级:5.06Is Samacsys:N
其他特性:ALSO OPERATES AT 5V SUPPLY差分输出:NO
驱动器位数:1高电平输入电流最大值:0.000001 A
输入特性:SCHMITT TRIGGER接口集成电路类型:LINE TRANSCEIVER
接口标准:EIA-232-F; TIA-232-F; V.28JESD-30 代码:R-PDSO-G16
JESD-609代码:e4长度:6.2 mm
湿度敏感等级:1功能数量:1
端子数量:16最高工作温度:70 °C
最低工作温度:最小输出摆幅:10 V
最大输出低电流:0.0016 A输出极性:TRUE
封装主体材料:PLASTIC/EPOXY封装代码:SSOP
封装等效代码:SSOP16,.3封装形状:RECTANGULAR
封装形式:SMALL OUTLINE, SHRINK PITCH峰值回流温度(摄氏度):260
电源:3.3/5 V认证状态:Not Qualified
最大接收延迟:接收器位数:1
座面最大高度:2 mm子类别:Line Driver or Receivers
最大压摆率:1 mA最大供电电压:3.6 V
最小供电电压:3 V标称供电电压:3.3 V
电源电压1-最大:3.6 V电源电压1-分钟:3 V
电源电压1-Nom:3.3 V表面贴装:YES
温度等级:COMMERCIAL端子面层:Nickel/Palladium/Gold (Ni/Pd/Au)
端子形式:GULL WING端子节距:0.65 mm
端子位置:DUAL处于峰值回流温度下的最长时间:NOT SPECIFIED
宽度:5.3 mmBase Number Matches:1

TRS3221ECDBRG4 数据手册

 浏览型号TRS3221ECDBRG4的Datasheet PDF文件第2页浏览型号TRS3221ECDBRG4的Datasheet PDF文件第3页浏览型号TRS3221ECDBRG4的Datasheet PDF文件第4页浏览型号TRS3221ECDBRG4的Datasheet PDF文件第5页浏览型号TRS3221ECDBRG4的Datasheet PDF文件第6页浏览型号TRS3221ECDBRG4的Datasheet PDF文件第7页 
TRS3221E  
3-V TO 5.5-V SINGLE-CHANNEL RS-232 LINE DRIVER/RECEIVER  
WITH ±15-kV IEC ESD PROTECTION  
www.ti.com  
SLLS792JUNE 2007  
FEATURES  
APPLICATIONS  
Battery-Powered, Hand-Held, and Portable  
Equipment  
ESD Protection for RS-232 Pins  
±15-kV Human-Body Model (HBM)  
PDAs and Palmtop PCs  
Notebooks, Subnotebooks, and Laptops  
Digital Cameras  
±8 kV (IEC 61000-4-2, Contact Discharge)  
±15 kV (IEC 61000-4-2, Air-Gap Discharge)  
Meets or Exceeds the Requirements of  
TIA/EIA-232-F and ITU v.28 Standards  
Mobile Phones and Wireless Devices  
Operates With 3-V to 5.5-V VCC Supply  
Operates up to 250 kbit/s  
DB OR PW PACKAGE  
(TOP VIEW)  
One Driver and One Receiver  
EN  
C1+  
V+  
FORCEOFF  
1
2
3
4
5
6
7
8
16  
15  
14  
13  
12  
11  
10  
9
Low Standby Current . . . 1 μA Typical  
External Capacitors . . . 4 × 0.1 μF  
Accepts 5-V Logic Input With 3.3-V Supply  
V
CC  
GND  
C1−  
C2+  
C2−  
V−  
DOUT  
FORCEON  
DIN  
Alternative High-Speed Pin-Compatible Device  
(1 Mbit/s)  
INVALID  
ROUT  
TRSF3221E  
RIN  
Auto-Powerdown Feature Automatically  
Disables Drivers for Power Savings  
DESCRIPTION/ORDERING INFORMATION  
The TRS3221E is a single driver, single receiver RS-232 solution operating from a single VCC supply. The  
RS-232 pins provide IEC G1000-4-2 ESD protection. The device meets the requirements of TIA/EIA-232-F and  
provides the electrical interface between an asynchronous communication controller and the serial-port  
connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V  
supply. These devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/μs driver output  
slew rate.  
Flexible control options for power management are available when the serial port is inactive. The  
auto-powerdown feature functions when FORCEON is low and FORCEOFF is high. During this mode of  
operation, if the device does not sense a valid RS-232 signal on the receiver input, the driver output is disabled.  
If FORCEOFF is set low and EN is high, both the driver and receiver are shut off, and the supply current is  
reduced to 1 μA. Disconnecting the serial port or turning off the peripheral drivers causes the auto-powerdown  
condition to occur. Auto-powerdown can be disabled when FORCEON and FORCEOFF are high.  
With auto-powerdown enabled, the device is activated automatically when a valid signal is applied to the  
receiver input. The INVALID output notifies the user if an RS-232 signal is present at the receiver input. INVALID  
is high (valid data) if the receiver input voltage is greater than 2.7 V or less than –2.7 V, or has been between  
–0.3 V and 0.3 V for less than 30 μs. INVALID is low (invalid data) if the receiver input voltage is between –0.3 V  
and 0.3 V for more than 30 μs. Refer to Figure 5 for receiver input levels.  
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas  
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.  
PRODUCTION DATA information is current as of publication date.  
Copyright © 2007, Texas Instruments Incorporated  
Products conform to specifications per the terms of the Texas  
Instruments standard warranty. Production processing does not  
necessarily include testing of all parameters.  

TRS3221ECDBRG4 替代型号

型号 品牌 替代类型 描述 数据表
MAX3221EIPWR TI

完全替代

3-V TO 5.5-V SINGLE-CHANNEL RS-232 LINE DRIVER/RECEIVER WITH 15-kV IEC ESD PROTECTION
MAX3221EIPW TI

完全替代

3-V TO 5.5-V SINGLE-CHANNEL RS-232 LINE DRIVER/RECEIVER WITH 15-kV IEC ESD PROTECTION
MAX3221ECPWR TI

完全替代

3-V TO 5.5-V SINGLE-CHANNEL RS-232 LINE DRIVER/RECEIVER WITH 15-kV IEC ESD PROTECTION

与TRS3221ECDBRG4相关器件

型号 品牌 获取价格 描述 数据表
TRS3221ECPW TI

获取价格

3-V TO 5.5-V SINGLE-CHANNEL RS-232 LINE DRIVE
TRS3221ECPWG4 TI

获取价格

3-V TO 5.5-V SINGLE-CHANNEL RS-232 LINE DRIVE
TRS3221ECPWR TI

获取价格

3-V TO 5.5-V SINGLE-CHANNEL RS-232 LINE DRIVE
TRS3221ECPWRG4 TI

获取价格

3-V TO 5.5-V SINGLE-CHANNEL RS-232 LINE DRIVE
TRS3221ECPWR-LI TI

获取价格

3-V to 5.5-V Single-Channel RS-232 Line Driver/Receiver With +/-15-kV IEC ESD Protection 1
TRS3221EIDB TI

获取价格

3-V TO 5.5-V SINGLE-CHANNEL RS-232 LINE DRIVE
TRS3221EIDBG4 TI

获取价格

3-V TO 5.5-V SINGLE-CHANNEL RS-232 LINE DRIVE
TRS3221EIDBR TI

获取价格

3-V TO 5.5-V SINGLE-CHANNEL RS-232 LINE DRIVE
TRS3221EIDBRG4 TI

获取价格

3-V TO 5.5-V SINGLE-CHANNEL RS-232 LINE DRIVE
TRS3221EIPW TI

获取价格

3-V TO 5.5-V SINGLE-CHANNEL RS-232 LINE DRIVE