TRF1600
www.ti.com
SPAS094A –FEBRUARY 2010–REVISED MAY 2011
TRUE RMS RF POWER DETECTOR
Check for Samples: TRF1600
1
FEATURES
•
•
Operating Temperature Range:
–20ºC to 85ºC
•
•
•
RF True RMS Power Detector
Small 2-mm x 2-mm QFN 6 Pin Package
RMS to DC Conversion Up to 2 GHz
Waveform and Modulation Independent
(CW, GSM, WCDMA, TDMA, HSUPA)
APPLICATIONS
•
•
•
Cellular Handsets (GSM, CDMA, TDMA)
Power Amplifier Control Loops
•
•
Linear-In-dB Output
Input Dynamic Range of 28 dB
(–29 dBm to –1 dBm)
Transmitter Power Measurement and Control
•
•
•
External Input Pin
6.7-mA Typical Operating Current
5-µA Maximum Shutdown Current
DESCRIPTION
The TRF1600 is a true RMS power detector with a 28-dB dynamic input range and a linear-to-dB DC output. It is
intended for use in wireless handheld devices such as cell phones and PDAs to measure and control PA output
power accurately independent of the modulation scheme.
The device is designed to operate off of a lithium-ion battery (2.7 V to 5.5 V, 6 V tolerant) or a regulated supply.
A low input signal at the enable pin puts the device in shut-down mode and supply current consumption is
reduced to <5 µA. When asserted high the device enters active mode and outputs a DC voltage proportional to
the RMS value of the input power expressed in dBm.
Table 1. ORDERING INFORMATION(1)
TA
PACKAGE(2)
ORDERABLE PART NUMBER
–20ºC to 85ºC
DRV
TRF1600DRVR
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
(2) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 2010–2011, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.