TQP3M9035
High-Linearity LNA Gain Block
Applications
Repeaters
Mobile Infrastructure
LTE / WCDMA / CDMA / GSM
General Purpose Wireless
TDD or FDD systems
2x2 mm 8 Pin DFN Package
Product Features
Functional Block Diagram
50−6000 MHz Operating Range
0.65 dB Noise Figure @ 1900 MHz
16.5 dB Gain @ 1900 MHz
+37 dBm Output IP3
+22.5 dBm P1dB
Shut-down capability
Unconditionally stable
50 Ohm Cascadable Gain Block
+5V Single Supply, 115 mA Current
2x2 mm 8 Pin DFN plastic package
General Description
Pin Configuration
The TQP3M9035 is a high-linearity, low noise gain block
amplifier in a low-cost surface-mount package. At 1900
MHz, the amplifier typically provides 16.5 dB gain, +37
dBm OIP3, and 0.65 dB Noise Figure. The LNA is also
designed to be broadband without the requirement for
external matching. The device is housed in a lead-
free/green/RoHS-compliant industry-standard 2x2 mm
package.
Pin #
1, 3, 4, 5, 8
Label
No Connect or GND
2
RF In
6
Shut Down
RF Out
7
Backside Paddle
RF/DC GND
The TQP3M9035 has the benefit of having high linearity
while also providing very low noise across a broad range
of frequencies. This allows the device to be used in both
receive and transmit chains for high performance
systems. The amplifier is internally matched using a
high performance E-pHEMT process and only requires
an external RF choke and blocking/bypass capacitors for
operation from a single +5V supply. The low noise
amplifier integrates a shut-down biasing capability to
allow for operation for TDD applications.
Ordering Information
The TQP3M9035 covers the 50−6000 MHz frequency
band and is targeted for wireless infrastructure or other
applications requiring high linearity and/or low noise
figure.
Part No.
Description
High Linearity LNA Gain Block
TQP3M9035
TQP3M9035-PCB
500−6000 MHz Eval. Board
Standard T/R size = 2500 pieces on a 7” reel.
Datasheet: Rev I 12-05-14
Disclaimer: Subject to change without notice
- 1 of 11 -
© 2014 TriQuint
www.triquint.com