TQP3M9028
High Linearity LNA Gain Block
Applications
• Repeaters
• Mobile Infrastructure
• Defense / Aerospace
• LTE / WCDMA / CDMA
• General Purpose Wireless
• IF Amplifier, RF Driver Amplifier
SOT-89 Package
Product Features
Functional Block Diagram
• 50-4000 MHz
• Flat gain (14.7 ± 0.3 dB) from 0.5 – 3.5 GHz
• +40 dBm Output IP3
GND
4
• 1.8 dB Noise Figure @ 1900 MHz
• No RF components needed; 50 Ohm Gain Block
• Unconditionally Stable
• +5V Single Supply, 85 mA Current
• SOT-89 Package
1
2
3
RF IN
GND
RF OUT
General Description
Pin Configuration
The TQP3M9028 is a cascadable, high linearity gain
block amplifier in a low-cost surface-mount package. At
1.9 GHz, the amplifier typically provides 14.7 dB gain,
+40 dBm OIP3, and 1.8 dB Noise Figure while only
drawing 85 mA current. The device is housed in a
leadfree/green/RoHS-compliant industry-standard SOT-
89 package.
Pin No.
1
Label
RF In
3
RF Out / DC Bias
Ground
2, 4
The TQP3M9028 has the benefit of having excellent
gain flatness across a broad range of frequencies. The
low noise figure and high linearity performance allows
the device to be used in both receiver and transmitter
chains for high performance systems. The amplifier is
internally matched using a high performance E-pHEMT
process and only requires an external RF choke and
blocking/bypass capacitors for operation from a single
+5V supply. The internal active bias circuit also enables
stable operation over bias and temperature variations.
The TQP3M9028 covers the 50-4000 MHz frequency
band and is targeted for wireless infrastructure or other
applications requiring high linearity and/or low noise
figure.
Ordering Information
Part No.
Description
TQP3M9028
High Linearity LNA Gain Block
TQP3M9028-PCB_IF 50-500 MHz Evaluation Board
TQP3M9028-PCB_RF 0.5-4 GHz Evaluation Board
Standard T/R size = 1000 pieces on a 7” reel
Datasheet: Rev F 04-23-14
Disclaimer: Subject to change without notice
- 1 of 10 -
© 2014 TriQuint
www.triquint.com