TQP369180
DC-6 GHz Gain Block
Applications
Wireless Infrastructure
CATV / SATV / MoCA
Point to Point
Defense & Aerospace
Test & Measurement Equipment
General Purpose Wireless
SOT-89 Package
Product Features
Functional Block Diagram
GND
4
DC-6000 MHz
Flat, broadband frequency response
15 dB Gain at 1.9 GHz
3.6 dB Noise Figure at 1.9 GHz
+29.5 dBm Output IP3 at 1.9 GHz
+14.4 dBm P1dB at 1.9 GHz
50 Ohm Cascadable Gain Block
Single Supply, 45 mA Current
SOT-89 Package
1
2
3
RF IN
GND
RF OUT
General Description
Pin Configuration
The TQP369180 is a general-purpose buffer amplifier
that offers high dynamic range in a low-cost surface-
mount package. At 1.9 GHz, the amplifier typically
provides 15.0 dB gain, +29.5 dBm OIP3, and 3.6 dB
Noise Figure while drawing 45 mA current. The device
combines dependable performance with consistent quality
to maintain MTTF values exceeding 100 years at
mounting temperatures of +85°C. The device is housed
in a lead-free/green/RoHS-compliant industry-standard
SOT-89 package.
Pin #
Symbol
1
RF IN
3
RF OUT
GND
2, 4
The TQP369180 consists of a Darlington-pair amplifier
using the high reliability InGaP/GaAs HBT process
technology. Only DC-blocking capacitors, a bias resistor,
and an inductive RF choke are required for operation.
This broadband MMIC amplifier can be directly applied
to various current and next generation wireless
technologies such as CDMA, W-CDMA, and LTE. In
addition, the TQP369180 will work for other applications
within the DC to 6 GHz frequency range.
Ordering Information
Part No.
Description
InGaP/GaAs HBT Gain Block
TQP369180
TQP369180-PCB
0.5-4 GHz Evaluation Board
Standard T/R size = 2500 pieces on a 13” reel
Data Sheet: Rev D 5/15/12
- 1 of 8 -
Disclaimer: Subject to change without notice
Connecting the Digital World to the Global Network®
© 2012 TriQuint Semiconductor, Inc.