TPT1043
Low-Power Fault Protected High-Speed CAN FD Transceiver with
Sleep Mode
Features
Description
The TPT1043 is a CAN transceiver that meets the
ISO11898 high-speed CAN (Controller Area Network)
physical layer standard. The device is designed to be
used in CAN FD networks up to 5 Mbps, with enhanced
timing margin and higher data rates in long and highly
loaded networks. As designed, the device features a –30-V
to +30-V common-mode range, CAN-Bus fault protection
from −70 V to +70 V, over-voltage protection, and over-
temperature shutdown. TPT1043 has an I/O power supply
for interface I/O to connect to microcontrollers with supply
voltages from 2.8 V to 5.5 V. The device comes with a
standby mode, which can be waked up from the CAN
BUS. The ultra-low power management controls the node
in standby and sleep modes. The device enables the
power supply by the INH interface through the local and
remote wake-up with wake-up source recognition, and it
includes many protection features to enhance the device
and network robustness.
Meet the ISO 11898-2:2016 and SAE J2284-1 to SAE
J2284-5 Physical Layer Standards
•
Supports CAN FD and Data Rating up to 5 Mbps
•
•
•
Short Propagation Delay Times and Fast Loop Times
5-V Power Supply, I/O Voltage Range Supports 2.8-V
to 5.5-V MCU Interface
Standby Mode and Extra Low Current Sleep Mode with
Local and Remote Bus Wake-Up Capability and INH
Output
•
Ideal Passive Behavior to CAN Bus when Unpowered
•
•
•
Common-Mode Input Voltage: ±30 V
Protection Feature:
IEC 61000-4-2 ESD Protection up to ±12 kV
–
Bus Fault Protection: ±70 V
–
VCC Undervoltage Protection
–
The TPT1043 is available in SOP14 and DFN4.5X3.0-14L
packages, and is characterized from −40°C to +125°C.
TXD Dominant Time-Out Function and Bus-
Dominant Time-Out Function
–
Thermal Shutdown Protection
–
Available in SOP14 Package and Leadless
DFN4.5X3-14L Package
•
Typical Application Circuit
BAT
Applications
VBAT
10
WAKE
VOUT
EN
VCC
9
3
5V Voltage
Regulator
All Devices Supporting Highly Loaded CAN Networks
•
Field Industrial Automation, Sensor and Driver Systems
•
•
•
EN
INH
VIO
7
5
3.3/5V Voltage
Regulator
VOUT
CANH
Building, Security Control Systems
13
Energy Storage Systems
TPT1043
Telecom Base Station Status and Control
VCC
•
CANL
Port_a
Port_b
Port_c
STB_N
EN
14
6
12
I/O
Interface
Optional
ERR_N
8
MCU
TX
TXD
RXD
1
4
CAN
Controller RX
2
www.3peak.com
1 / 26
CA20230204A1