TPS7A83A
SBVS304B – JUNE 2017 – REVISED OCTOBER 2021
TPS7A83A 2-A, High-Accuracy (0.75%), Low-Noise (4.4 μVRMS) LDO Regulator
1 Features
3 Description
•
•
Low dropout: 200 mV (max) at 2 A
Accuracy over line, load, and temperature with
BIAS: 0.75% (max)
Output voltage noise:
– 4.4 μVRMS at 0.8-V output
Input voltage range:
– Without BIAS: 1.4 V to 6.5 V
– With BIAS: 1.1 V to 6.5 V
TPS7A8300A output voltage range:
– Adjustable operation: 0.8 V to 5.2 V
– ANY-OUT™ operation: 0.8 V to 3.95 V
TPS7A8301A output voltage range:
– Adjustable operation: 0.5 V to 5.2 V
– ANY-OUT™ operation: 0.5 V to 2.075 V
Power-supply ripple rejection:
– 40 dB at 500 kHz
The TPS7A83A is a low-noise (4.4 μVRMS), low-
dropout, linear regulator (LDO) capable of sourcing
2 A with only 200 mV of maximum dropout. The
TPS7A8300A output voltage is pin programmable
from 0.8 V to 3.95 V with a 50-mV resolution, and
adjustable from 0.8 V to 5.2 V using an external
resistor divider. The TPS7A8301A output voltage is
pin programmable from 0.5 V to 2.075 V with a 25-mV
resolution, and adjustable from 0.5 V to 5.2 V using
an external resistor divider.
•
•
•
•
•
The combination of low noise
, high PSRR,
and high output current capability makes the
TPS7A83A an excellent choice to power noise-
sensitive components such as those found in high-
speed communications, video, medical, or test
and measurement applications. This device is
designed for powering high-performance serializer
and deserializer (SerDes), analog-to-digital converters
(ADCs), digital-to-analog converters (DACs), and
RF components because the high performance of
the TPS7A83A limits power-supply-generated phase
noise and clock jitter. Specifically, RF amplifiers
benefit from the high-performance and 5.2-V output
capability of the device.
•
•
•
Excellent load transient response
Adjustable soft-start inrush control
Open-drain power-good (PG) output
2 Applications
•
•
•
•
•
•
Macro remote radio units (RRU)
Outdoor backhaul units
Active antenna system mMIMO (AAS)
Ultrasound scanners
Lab and field instrumentation
Sensor, imaging, and radar
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE (nom)
3.50 mm × 3.50 mm
5.00 mm × 5.00 mm
TPS7A83A
VQFN (20)
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
CBIAS
Bias
Supply
1.2 VIN
BIAS
IN
CIN
TPS7A8300A: 0.9 VOUT
TPS7A8301A: 0.55 VOUT
PG
OUT
SNS
FB
EN
RPG
To Digital
Load
COUT
NR/SS
CNR/SS
TPS7A8300(01)A
1.6 V (0.8 V)
CFF
800 mV(400 mV)
400 mV (200 mV)
200 mV (100 mV)
100 mV (50 mV)
50 mV (25 mV)
ANYOUT
Used to set
voltage
GND
Typical Application Circuit
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.