TPS7A6301-Q1, TPS7A6333-Q1
TPS7A6350-Q1, TPS7A6401-Q1
www.ti.com
SLVSAB1D –JUNE 2011–REVISED JULY 2012
300-mA 40-V LOW-DROPOUT REGULATOR WITH ULTRALOW Iq
Check for Samples: TPS7A6301-Q1, TPS7A6333-Q1, TPS7A6350-Q1, TPS7A6401-Q1
1
FEATURES
•
•
Low Input-Voltage Tracking
Thermally Enhanced 14-pin TSSOP - PWP
Package and 10-pin VSON - DRK Package
•
•
Qualified for Automotive Applications
AEC-Q100 Test Guidance With the Following
Results:
APPLICATIONS
–
Device Temperature Grade 1: –40°C to
125°C Ambient Operating Temperature
•
•
•
Infotainment Systems With Sleep Mode
Body Control Modules
–
–
Device HBM ESD Classification Level H2
Device CDM ESD Classification Level C2
Always-On Battery Applications
–
–
–
Gateway Applications
Remote Keyless Entry Systems
Immobilizers
•
•
Low Dropout Voltage
300 mV at IOUT = 150 mA
–
4-V to 40-V Wide Input-Voltage Range
With up to 45-V Transients
DESCRIPTION
•
•
300-mA Maximum Output Current
Ultralow Quiescent Current
The TPS7A63xx-Q1 and TPS7A6401-Q1 are a family
of low-dropout linear voltage regulators designed for
low power consumption and quiescent current less
than 35 µA in light-load applications. These devices,
designed to achieve stable operation even with a low-
ESR ceramic output capacitor, feature an integrated
programmable window watchdog and overcurrent
protection. Designers can program the output voltage
using external resistors.
feature allows for a smaller input capacitor and can
possibly eliminate the need of using boost
converter during cold-crank conditions. The power-
on-reset delay is fixed (250 µs typical), or an external
capacitor can program the delay. Because of such
features, these devices are well-suited in power
supplies for various automotive applications.
–
–
IQUIESCENT = 35 µA (Typ.) at Light Loads
ISLEEP < 2 µA When EN = Low
•
Fixed (3.3-V and 5-V) and Adjustable (2.5-V to
7-V) Output Voltages
•
•
Integrated Watchdog With Fault/Flag
A low-voltage tracking
Stable With Low-ESR Ceramic Output
Capacitor
a
•
Integrated Power-On Reset
–
–
Programmable Delay
Open-Drain Reset Output
•
Integrated Fault Protection
–
–
Short-Circuit/Overcurrent Protection
Thermal Shutdown
TYPICAL APPLICATION SCHEMATIC
TPS7A6x01-Q1
TPS7A6333-Q1
VOUT
VOUT
COUT
VOUT
VOUT
COUT
VIN
VIN
VIN
or
TPS7A6350-Q1
VIN
CIN
CIN
R1
R2
FB
RRST
RDELAY
RDELAY
RRST
CDLY
CDLY
ROSC
GND
ROSC
GND
ROSC
ROSC
RESET
RESET
nRST
nRST
RFLT/FLAG
RFLT/FLAG
WD_FLT/
WD_FLG
WD_FLT/
WD_FLG
FAULT/
FLAG
FAULT/
FLAG
EN nWD_EN WD
EN nWD_EN WD
Figure 1. Fixed Output Voltage Option
Figure 2. Adjustable Output Voltage Option
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2011–2012, Texas Instruments Incorporated