TPS73201-EP, TPS73215-EP
TPS73216-EP, TPS73218-EP, TPS73225-EP
TPS73230-EP, TPS73233-EP, TPS73250-EP
www.ti.com
SGLS346–JUNE 2006
CAP-FREE NMOS 250-mA LOW DROPOUT REGULATOR
WITH REVERSE CURRENT PROTECTION
FEATURES
APPLICATIONS
•
•
•
•
Portable/Battery-Powered Equipment
Post-Regulation for Switching Supplies
Noise-Sensitive Circuitry such as VCOs
Point of Load Regulation for DSPs, FPGAs,
ASICs, and Microprocessors
•
Controlled Baseline
– One Assembly/Test Site, One Fabrication
Site
•
•
Extended Temperature Performance of
–55°C to 125°C
Enhanced Diminishing Manufacturing
Sources (DMS) Support
Optional
Optional
•
•
•
Enhanced Product-Change Notification
VIN
VOUT
IN
OUT
TPS732xx
GND NR
(1)
Qualification Pedigree
Stable with No Output Capacitor or Any Value
or Type of Capacitor
EN
•
•
Input Voltage Range: 1.7 V to 5.5 V
Optional
Typical Application Circuit for Fixed-Voltage Versions
Ultralow Dropout Voltage:
40 mV Typ at 250 mA
•
•
Excellent Load Transient Response—with or
without Optional Output Capacitor
DESCRIPTION
New NMOS Topology Provides Low Reverse
Leakage Current
The TPS732xx family of low-dropout (LDO) voltage
regulators uses a new topology: an NMOS pass
element in a voltage-follower configuration. This
topology is stable using output capacitors with low
ESR and even allows operation without a capacitor.
It also provides high reverse blockage (low reverse
current) and ground pin current that is nearly
constant over all values of output current.
•
•
•
Low Noise: 30 µVRMS Typ (10 kHz to 100 kHz)
0.5% Initial Accuracy
1% Overall Accuracy (Line, Load, and
Temperature)
•
•
Less Than 1 µA Max IQ in Shutdown Mode
Thermal Shutdown and Specified Min/Max
Current Limit Protection
The TPS732xx uses an advanced BiCMOS process
to yield high precision while delivering low dropout
voltages and low ground pin current. Current
consumption, when not enabled, is under 1 µA and
ideal for portable applications. The low output noise
(30 µVRMS with 0.1 µF CNR) is ideal for powering
VCOs. These devices are protected by thermal
shutdown and foldback current limit.
•
Available in Multiple Output Voltage Versions
– Fixed Outputs of 1.2 V to 5 V
– Adjustable Outputs from 1.2 V to 5.5 V
– Custom Outputs Available
DCQ PACKAGE
SOT223
(TOP VIEW)
DBV PACKAGE
DRB PACKAGE
3mm x 3mm SON
(TOP VIEW)
SOT23
(TOP VIEW)
TAB IS GND
OUT
N/C
1
2
3
4
8
7
6
5
IN
(1) Component qualification in accordance with JEDEC and
industry standards to ensure reliable operation over an
extended temperature range. This includes, but is not limited
to, Highly Accelerated Stress Test (HAST) or biased 85/85,
temperature cycle, autoclave or unbiased HAST,
5
4
IN
GND
EN
1
2
3
OUT
N/C
N/C
EN
1
2
3
4
5
NR/FB
GND
NR/FB
IN
GND
EN
OUT
NR/FB
electromigration, bond intermetallic life, and mold compound
life. Such qualification testing should not be viewed as
justifying use of this component beyond specified
performance and environmental limits.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Copyright © 2006, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.