TPS62868, TPS62869
SLVSFS3B – SEPTEMBER 2020 – REVISED JULY 2021
TPS62868x 2.4-V to 5.5-V Input, 4-A/6-A Synchronous Step-Down Converter with I2C
Interface in QFN Package
1 Features
2 Applications
•
•
•
•
11-mΩ and 10.5-mΩ internal power MOSFETs
>90% efficiency (0.9-V output)
DCS-Control topology for fast transient response
Available output voltage ranges for dynamic
voltage scaling (DVS) through I2C
– Output voltage range from 0.2-V to 0.8375-V
with 2.5-mV step size
– Output voltage range from 0.4-V to 1.675-V
with 5-mV step size
– Output voltage range from 0.8-V to 3.35-V with
10-mV step size
•
Core supply for FPGAs, CPUs, ASICs, or video
chipsets
IP network camera
Solid-state drives
Optical modules
•
•
•
•
LPDDR5 VDDQ rail supply
3 Description
The TPS62868 and TPS62869 devices are high-
frequency synchronous step-down converters with I2C
interface which provide an efficient, adaptive, and
high power-density solution. At medium to heavy
loads, the converter operates in PWM mode and
automatically enters Power Save Mode operation at
light load to maintain high efficiency over the entire
load current range. The device can also be forced
in PWM mode operation for smallest output voltage
ripple. Together with its DCS-Control architecture,
excellent load transient performance and tight output
voltage accuracy are achieved. Through the I2C
interface and a dedicated VID pin, the output voltage
is quickly adjusted to adapt the power consumption of
the load to the ever-changing performance needs of
the application.
•
•
•
1% output voltage accuracy
2.4-MHz switching frequency
Selection by external resistor
– Start-up output voltage
– I2C target address
•
Selection by I2C interface
– Power save mode or forced PWM mode
– Output discharge
– Hiccup or latching short-circuit protection
– Output voltage ramp speed
•
•
Thermal pre-warning and thermal shutdown
Power good indicator pin option with window
comparator
•
•
I2C-compatible interface up to 3.4 Mbps
Available in 1.5-mm x 2.5-mm x 1.0-mm 9-pin QFN
package with 0.5-mm pitch
Device Information
PART NUMBER
TPS62868
TPS62869
PACKAGE(1)
BODY SIZE (NOM)
QFN (9)
1.5 x 2.5 x 1.0 mm
•
•
Also available in WCSP package: TPS62866,
6-A synchronous step-down converter with I2C
interface in 1.05-mm x 1.78-mm WCSP package
Create a custom design using with TPS62868/9
with the WEBENCH® Power Designer
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
95
90
85
80
75
70
VIN
2.4 V to 5.5 V
L1
0.22 µH
TPS62868/9
VOUT
VIN
EN
SW
C1
VOS
C2
65
VSET/VID
or PG
VOUT = 0.6V, PWM
SCL
SDA
I2C
60
55
50
45
VOUT = 0.6V, PSM
VOUT = 1.2V, PSM
VOUT = 0.9V, PWM
VOUT = 0.9V, PSM
VOUT = 1.2V, PWM
R1
AGND PGND
100m
1m
10m
Load (A)
100m
1
6
D000
Typical Application
Efficiency at VIN = 3.3 V
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.