TPS61253A
TPS61253A
www.ti.com
SLVSDE4C – MARCH 2017 – REVISED NOVEMBER 2020
SLVSDE4C – MARCH 2017 – REVISED NOVEMBER 2020
TPS61253A 3.8-MHz, 5-V / 4-A Boost Converter in 1.2-mm x 1.3-mm WCSP
1 Features
3 Description
•
•
•
Wide input voltage range from 2.3 V to 5.5 V
Fixed output voltage: 4.5 / 4.7 / 5.0 / 5.2 V
Two FETs integrated: 35-mΩ LS-FET, 60-mΩ HS-
FET
IOUT ≥ 1500-mA continuously at VOUT = 5 V and
VIN ≥ 3 V
42-µA quiescent current from input
4-A switching valley current limit
3.8-MHz switching frequency
Selectable auto PFM, forced PWM, and ultrasonic
mode
Support pass-through mode
±2% output voltage accuracy
600-µs soft-start time
Hiccup-mode short protection
Load disconnection during shutdown
Thermal shutdown
The TPS6125xA device provides a power supply
solution for battery-powered portable applications.
With the input voltage ranging from 2.3 V to 5.5 V, the
device supports the applications powered by the Li-
Ion batteries with the extended voltage range.
Different fixed output voltage versions are available of
4.5 V, 4.7 V, 5 V, and 5.2 V. The TPS6125xA supports
up to 1500-mA load current from a battery discharged
as low as 3 V.
•
•
•
•
•
The TPS6125xA operates at typical 3.8-MHz
switching frequency. The TPS6125xA can be flexibly
configured at the Auto PFM mode, forced PWM
mode, or ultrasonic mode. The Auto PFM mode can
benefit with the high efficiency at the light load. The
forced PWM operation can make the switching
frequency be constant crossing the whole load range.
The ultrasonic mode keeps the switching frequency
always larger than 25 kHz at any load condition to
avoid the acoustic noise.
•
•
•
•
•
•
•
•
Total solution size < 25 mm2
Create a custom design using the TPS61253A
with the WEBENCH® Power Designer
TPS6125xA has a built-in 600-µs soft start to avoid
the inrush current at start-up. When the output is
shorted, the device enters into the hiccup mode and
recovers automatically after the short releases. During
the shutdown, the load is completely disconnected
from the input end with maximum 1.3-μA current
being consumed.
2 Applications
•
•
•
•
•
Smart phones
Portable speaker
USB charging ports
NFC PA supply
Li battery to 5-V power conversion
Device Information
PART NUMBER
PACKAGE(1)
BODY SIZE (NOM)
TPS61253A
DSBGA (9)
1.2 mm × 1.3 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
L
VOUT
VIN
CIN
SW
VIN
VOUT
COUT
Forced PWM (High)
Ultrasonic (Floating)
Auto PFM (Low)
MODE
GND
ON
OFF
EN
Typical Schematic
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
Product Folder Links: TPS61253A
Copyright © 2020 Texas Instruments Incorporated
Submit Document Feedback
1