TPS60200, TPS60201, TPS60202, TPS60203
REGULATED 3.3 V, 100-mA LOW-RIPPLE CHARGE PUMP
LOW POWER DC/DC CONVERTERS
SLVS274 – MARCH 2000
0.05 µA Shutdown Current, Battery Is
Isolated From Load in Shutdown Mode
features
Regulated 3.3-V Output Voltage With up to
100 mA Output Current From a 1.8 V to
3.6 V Input Voltage
Less Than 5 mV
Compact Converter Solution in Ultra-Small
10-pin MSOP With Only Four External
Capacitors Required
Output Voltage Ripple
(PP)
Evaluation Module Available
(TPS60200EVM-145)
Achieved With Push-Pull Topology
Integrated Low-Battery and Power-Good
Detector
applications
Switching Frequency Can Be Synchronized
to External Clock Signal
Replaces DC/DC Converters With Inductors
in Battery Powered Applications Like:
– Two Battery Cells to 3.3-V Conversion
– MP3 Portable Audio Players
– Battery-Powered Microprocessor
Systems
– Backup-Battery Boost Converters
– PDA’s, Organizers, Cordless Phones
– Handheld Instrumentation
Extends Battery Usage With up to 90%
Efficiency and 35 µA Quiescent Supply
Current
Reliable System Shutdown Because Output
Capacitor Is Discharged When Device Is
Disabled
Easy-To-Design, Low Cost, Low EMI Power
Supply Since No Inductors Are Used
– Glucose Meters and Other Medical
Instruments
·
description
The TPS6020x step-up, regulated charge pumps generate a 3.3-V ± 4% output voltage from a 1.8-V to 3.6-V
input voltage. The devices are typically powered by two Alkaline, NiCd or NiMH battery cells and operate down
to a minimum supply voltage of 1.6 V. Continuous output current is a minimum of 100 mA for the TPS60200 and
TPS60201 and 50 mA for the TPS60202 and TPS60203, all from a 2-V input. Only four external capacitors are
needed to build a complete low-ripple dc/dc converter. The push-pull operating mode of two single-ended
charge pumps assures the low output voltage ripple as current is continuously transferred to the output.
TPS60200
OUTPUT
3.3V, 100 mA
INPUT
1.6V to 3.6V
PEAK OUTPUT CURRENT
vs
TPS60200
5
7
1
IN
OUT
INPUT VOLTAGE
C
o
350
300
250
R1
R2
C
i
µ
R3
µ
2.2
F
2.2
F
LBI
10
LBO
Low Battery
Warning
4
6
8
C1+
C2+
C2–
C1
200
150
100
50
3
9
C2
µ
1
F
C1–
EN
µ
1
F
GND
2
OFF/ON
Figure 1. Typical Application Circuit
With Low-Battery Warning
0
1.6
2.0
2.4
2.8
3.2
3.6
V – Input Voltage – V
I
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 2000, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265