TPS54061
www.ti.com
SLVSBB7A –MAY 2012–REVISED MAY 2012
Wide Input 60V, 200mA Synchronous Step-Down DC-DC Converter with Low IQ
Check for Samples: TPS54061
1
FEATURES
DESCRIPTION
The TPS54061 device is
a
60-V, 200-mA,
2
•
Integrated High Side and Low Side MOSFET
synchronous step-down DC-DC converter with
integrated high side and low side MOSFETs. Current
mode control provides simple external compensation
and flexible component selection. The non-switching
supply current is 90 µA. Using the enable pin,
shutdown supply current is reduced to 1.4 µA.
•
Diode Emulation for Improved Light Load
Efficiency
•
•
•
•
Peak Current Mode Control
90 µA Operating Quiescent Current
1.4 µA Shutdown Supply Current
To increase light load efficiency the low side
MOSFET emulates a diode when the inductor current
reaches zero.
50 kHz to 1100 kHz Adjustable Switching
Frequency
•
•
•
•
Synchronizes to External Clock
Internal Slow Start
Under voltage lockout is internally set at 4.5 V, but
can be increased using two resistors on the enable
pin. The output voltage startup ramp is controlled by
the internal slow start time.
0.8 V ±1% Voltage Reference
Stable with Ceramic Output Capacitors or Low
Cost Aluminum Electrolytic
The adjustable switching frequency range allows
efficiency and external component size to be
optimized. Frequency foldback and thermal shutdown
protects the part during an overload condition.
•
•
•
Cycle-by-Cycle Current Limit, Thermal, OVP
and Frequency Fold Back Protection
VSON-8 Package, 3 mm X 3 mm With Thermal
Pad
The TPS54061 enables small designs by integrating
the MOSFETs, boot recharge diode, and minimizing
the IC footprint with a small 3mm x 3mm thermally
enhanced VSON package
–40°C to 150°C Operating Junction
Temperature
APPLICATIONS
The TPS54061 is supported in the Webench™
Designer at www.ti.com.
•
•
•
4-20 mA Current-Loop Powered Sensors
Low Power Standby or Bias Voltage Supplies
EFFICIENCY
Industrial Process Control, Metering, and
Security Systems
100
90
80
70
60
50
40
30
•
High Efficiency Replacement for High Voltage
Linear Regulators
SIMPLIFIED SCHEMATIC
VIN
BOOT
VIN
TPS54061
VOUT
V
V
= 5 V
EN
PH
V
F
= 12 V,
OUT
OUT
IN
20
10
0
= 400 kHz
= 3.3 V
SW
RT /CLK
VSNS
0
0.025
0.05
0.075
0.1
0.125
0.15
0.175
0.2
Load Current (A)
COMP
GND
PowerPAD
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
Webench is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2012, Texas Instruments Incorporated