TPS51518
www.ti.com
SLUSAO8 –DECEMBER 2011
Single-Phase, D-CAP™ and D-CAP2™ Controller with 2-Bit Flexible VID Control
Check for Samples: TPS51518
1
FEATURES
APPLICATIONS
2
•
Differential Voltage Feedback
•
•
•
Notebook Computers
•
•
•
DC Compensation for Accurate Regulation
Wide Input Voltage Range: 3 V to 28 V
GFX Supplies
System Agent for Intel Chief River Platform
Flexible, 2-Bit VID Supports Output Voltage
from 0.5 V to 2.0 V
DESCRIPTION
The TPS51518 is
a
single phase, D-CAP™/
•
Adaptive On-Time Modulation with Selectable
Control Architecture
D-CAP2™ synchronous buck controller with 2-bit VID
inputs which can select up to four independent
externally programmable output voltage levels where
full external programmability in the voltage level, step
setting and voltage transition slew rate is desired. It is
used for GFX applications where multiple voltage
levels are desired.
–
D-CAP™ Mode at 350 kHz for Fast
Transient Response
–
D-CAP2™ Mode at 350 kHz for
Ultra-Low/Low ESR Output Capacitor
•
•
4700 ppm/°C, Low-Side RDS(on) Current Sensing
The TPS51518 supports all POS/SPCAP and/or all
ceramic MLCC output capacitor options in
applications where remote sense is a requirement.
Tight DC load regulation is achieved through external
programmable integrator capacitor.
Programmable Soft-Start Time and Output
Voltage Transition Time
•
•
•
•
•
•
Built-In Output Discharge
Power Good Output
Integrated Boost Switch
The TPS51518 provides full protection suite,
including OVP, OCL, 5-V UVLO and thermal
shutdown. It supports the conversion voltage up to
28 V, and output voltages adjustable from 0.5 V to
2 V.
Built-In OVP/UVP/OCP
Thermal Shutdown (Non-latched)
3 mm × 3 mm, 20-Pin, QFN (RUK) Package
The TPS51518 is available in the 3 mm × 3 mm,
QFN, 0.4-mm pitch package and is specified
from –10°C to 105°C.
GSNS
VSNS
GSNS
SLEW
TRIP
GND
MODE
V5IN
V5IN
VIN
V3
V2
V1
V0
DRVL
DRVH
SW
VSNS
TPS51518
VOUT
BST
VREF PGOOD VID0
VID1 EN
PGOOD
VID0
VID1 EN
UDG-11217
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
D-CAP, D-CAP2 are trademarks of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2011, Texas Instruments Incorporated