TPS27082L
www.ti.com
SLVSBR5 –DECEMBER 2012
1.2V - 8V, 3A PFET Load Switch with Adjustable Slew Rate, Fast Transient Isolation and
Hysteretic Control
Check for Samples: TPS27082L
1
FEATURES
APPLICATIONS
•
Low ON Resistance, High Current PFET
•
•
•
•
•
High Side Load Switch
Inrush-current Control
–
–
–
–
–
RDS(ON) = 32mΩ (Typical) at VGS = –4.5V
RDS(ON) = 44mΩ (Typical) at VGS = –3.0V
RDS(ON) = 85mΩ (Typical) at VGS = –1.8V
RDS(ON) = 97mΩ (Typical) at VGS = –1.5V
RDS(ON) = 155mΩ (Typical) at VGS = –1.2V
Power Sequencing and Control
Stand-by Power Isolation
Portable Power Switch
DESCRIPTION
•
Adjustable Turn-ON and Turn-OFF Slew Rate
The TPS27082L IC is a high side load switch that
integrates a Power PFET and a control circuit in a
tiny TSOT-23 package. TPS27082L requires very low
ON-state quiescent current and offers very low OFF-
state leakage thus optimizing system power
efficiency.
–
10µsec Default Minimum Output Rise Time
at VIN=5V
•
•
•
Adjustable Turn-ON and Turn-OFF Slew Rate
Supports a Wide Range of VIN 1.2V up to 8V
Excellent OFF Isolation Even Under Fast Input
Transients
TPS27082L ON/OFF logic interface features
hysteresis, thus providing a robust logic interface
even under very noisy operating conditions.
TPS27082L ON/OFF interface supports direct
interfacing to low voltage GPIOs down to 1V. The
TPS27082L level shifts ON/OFF logic signal to VIN
levels without requiring an external level shifter.
•
•
1.0V up to 8V NMOS Control Logic Interface
With Adjustable Hystersis
Fully Protected Against ESD (All Pins)
–
HBM 2kV, CDM 500V
•
•
•
Very Low ON-state Quiescent Current (Down
to 1.2µA)
TPS27082L features a novel OFF isolation circuit that
prevents PMOS from turning ON in applications that
may have fast transients, at the VIN pin when the
load switch is in the OFF-state.
Very Low OFF-state Leakage Current (Typ
100nA)
Available in 2.9mm x 1.6mm x 0.75mm SOT-23
(DDC) Package
TPS27082L
TPS27082LDDC
(TOP VIEW)
VIN
VOUT
Q1
(4)
(2, 3)
1
2
3
GND
R1/C1
ON/OFF
VIN
6
5
4
R1
ESD
ESD
VOUT
VOUT
C1
(6)
(5)
R1/C1
2.9mm x 1.6mm x 0.75mm
TSOT-23(DDC)
ESD
TPS27082L Package (DDC)
Q2
ON/OFF
Logic &
Control
Component Table (Typical Application)
ESD
RS=12.5kΩ
(1)
Component
Description
Level Shift Pull-up Resistor
Optional(1)
R1
C1
GND
Simplified Block & Application Diagram
(1) Required for load inrush current (slew rate) control.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2012, Texas Instruments Incorporated