TPS2552
TPS2553, TPS2552-1, TPS2553-1
www.ti.com...................................................................................................................................... SLVS841C–NOVEMBER 2008–REVISED SEPTEMBER 2009
PRECISION ADJUSTABLE CURRENT-LIMITED POWER-DISTRIBUTION SWITCHES
1
FEATURES
DESCRIPTION
2
•
•
•
•
•
•
Up to 1.5 A Maximum Load Current
±6% Current-Limit Accuracy at 1.7 A (typ)
Meets USB Current-Limiting Requirements
Backwards Compatible with TPS2550/51
Adjustable Current Limit, 75 mA–1700 mA (typ)
The
TPS2552/53
and
TPS2552-1/53-1
power-distribution switches are intended for
applications where precision current limiting is
required or heavy capacitive loads and short circuits
are encountered and provide up to 1.5
A of
continuous load current. These devices offer a
programmable current-limit threshold between 75 mA
and 1.7 A (typ) via an external resistor. Current-limit
accuracy as tight as ±6% can be achieved at the
higher current-limit settings. The power-switch rise
and fall times are controlled to minimize current
surges during turn on/off.
Constant-Current (TPS2552/53) and Latch-off
(TPS2552-1/53-1) Versions
•
•
•
•
•
•
Fast Overcurrent Response - 2-µS (typ)
85-mΩ High-Side MOSFET (DBV Package)
Reverse Input-Output Voltage Protection
Operating Range: 2.5 V to 6.5 V
Built-in Soft-Start
TPS2552/53 devices limit the output current to a safe
level by using a constant-current mode when the
output load exceeds the current-limit threshold.
TPS2552-1/53-1 devices provide circuit breaker
functionality by latching off the power switch during
overcurrent or reverse-voltage situations. An internal
15 kV ESD Protection per IEC 61000-4-2 (with
External Capacitance)
•
UL Listed – File No. E169910
reverse-voltage
comparator
disables
the
APPLICATIONS
power-switch when the output voltage is driven higher
than the input to protect devices on the input side of
the switch. The FAULT output asserts low during
overcurrent and reverse-voltage conditions.
•
•
•
•
USB Ports/Hubs
Digital TV
Set-Top Boxes
VOIP Phones
TPS2552/53
5V USB
TPS2552/TPS2553
DRV PACKAGE
(TOP VIEW)
TPS2552/TPS2553
DBV PACKAGE
(TOP VIEW)
USB Data
0.1 mF
USB
Port
Input
RFAULT
100 kW
IN
OUT
6
6
1
2
3
1
2
3
OUT
ILIM
IN IN
GND GND
EN
OUT
ILIM
FAULT
PAD
120 mF
5
4
5
4
ILIM
EN
FAULT
RILIM
Fault Signal
Control Signal
FAULT
EN
USB requirement only*
20 kW
GND
EN = Active Low for the TPS2552
EN = Active High for the TPS2553
Add -1 to part number for lach-off version
*USB requirement that downstream
facing ports are bypassed with at least
120 mF per hub
Power Pad
Figure 1. Typical Application as USB Power Switch
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
PowerPAD is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2008–2009, Texas Instruments Incorporated