TPS2551-Q1
www.ti.com ...................................................................................................................................................................................................... SLVS850–JUNE 2008
ADJUSTABLE CURRENT-LIMITED POWER-DISTRIBUTION SWITCH
1
FEATURES
DESCRIPTION
•
•
•
•
•
•
•
•
•
•
•
Qualified for Automotive Applications
Adjustable Current-Limit: 100 mA to 1100 mA
Fast Overcurrent Response: 2 µs (Typ)
85-mΩ High-Side MOSFET
The TPS2551 power-distribution switch is intended
for applications in which heavy capacitive loads and
short circuits are likely to be encountered,
incorporating a 100-mΩ, N-channel MOSFET in a
single package. The current-limit threshold is user
adjustable between 100 mA and 1.1 A via an
external resistor. The power-switch rise and fall times
are controlled to minimize current surges during
switching.
Reverse Input-Output Voltage Protection
Operating Range: 2.5 V to 6.5 V
Deglitched Fault Report
1-µA Maximum Standby Supply Current
Junction Temperature Range: –40°C to 125°C
Built-in Soft-Start
The device limits the output current to a desired level
by switching into a constant-current mode when the
output load exceeds the current-limit threshold or a
short is present. An internal reverse-voltage detection
comparator disables the power-switch in the event
that the output voltage is driven higher than the input
to protect devices on the input side of the switch. The
FAULT logic output asserts low during both
overcurrent and reverse-voltage conditions.
15-kV ESD Protection (With External
Capacitance)
APPLICATIONS
•
•
•
•
•
USB Ports/Hubs
Cell Phones
Laptops
Heavy Capacitive Loads
Reverse-Voltage Protection
USB Data
0.1 µF
USB
Port
IN
OUT
5-V USB Input
RFAULT
100 kW
DBV PACKAGE
(TOP VIEW)
120 µF *
1
2
3
6
5
4
IN
GND
EN
OUT
ILIM
FAULT
FAULT
EN
ILIM
FAULT Signal
RILIM
15 kW
Control Signal
GND
GND
* USB requirement that downstream-facing ports are bypassed with at least 120 µF per hub
Figure 1. Typical Application as USB Power Switch
GENERAL SWITCH CATALOG
33 mW, Single
80 mW, Single
80 mW, Triple
80 mW, Dual
80 mW, Dual
80 mW, Quad
80 mW, Quad
TPS201xA 0.2 A to 2 A
0.2 A to 2 A
0.2 A to 2 A
TPS2014
TPS2015
TPS2041B 500 mA
TPS2051B 500 mA
TPS2045A 250 mA
TPS2049 100 mA
TPS2055A 250 mA
TPS2061
TPS2065
TPS2068
TPS2069
600 mA
1 A
TPS202x
TPS203x
TPS2042B 500 mA
TPS2052B 500 mA
TPS2046B 250 mA
TPS2080 500 mA
TPS2081 500 mA
TPS2082 500 mA
TPS2090 250 mA
TPS2091 250 mA
TPS2092 250 mA
TPS2043B 500 mA
TPS2053B 500 mA
TPS2047B 250 mA
TPS2057A 250 mA
TPS2056
TPS2062
TPS2066
TPS2060
TPS2064
250 mA
1 A
1 A
1.5 A
1.5 A
TPS2044B 500 mA
TPS2054B 500 mA
TPS2048A 250 mA
TPS2085 500 mA
TPS2086 500 mA
TPS2087 500 mA
TPS2095 250 mA
TPS2096 250 mA
TPS2097 250 mA
1 A
1 A
1.5 A
1.5 A
TPS2063
TPS2067
1 A
1 A
TPS2058
250 mA
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2008, Texas Instruments Incorporated