TPS2540
TPS2541
www.ti.com
SLVSAG2 –OCTOBER 2010
USB Charging Port Power Switch and Controller
Check for Samples: TPS2540 , TPS2541
1
FEATURES
DESCRIPTION
2
•
•
•
Meets Battery Charging Specification BC1.2
(draft) for DCP and CDP
The TPS2540 and TPS2541 are a combination of
current-limited USB port power switch with a USB 2.0
high-speed data line (D+/D-) switch and a USB
charging port identification circuit. Applications
include notebook PCs and other intelligent USB host
devices. The wide bandwidth (2.6 GHz) data-line
switch also features low capacitance and low on
resistance, allowing signals to pass with minimum
edge and phase distortion. The TPS2540/41 monitors
D+ and D-, providing the correct hand-shaking
protocol with compliant client devices.
Meets Chinese Telecommunications Industry
Standard YD/T 1591-2009
Supports Sleep-Mode Charging for Most
Available Apple® Devices and/or BC1.2 (draft)
Compliant Devices
•
Compatible With USB 2.0 and 3.0 Power
Switch Requirements
•
•
•
•
2.6-GHz Bandwidth USB 2.0 Data Switch
73-mΩ (typ.) High-Side MOSFET
The TPS2540/41 supports the following charging
logic schemes:
Adjustable Current Limit up to 2.8 A (typical)
•
•
•
USB 2.0 BC1.2 (draft)
Chinese Telecom Standard YD/T 1591-2009
Divider Mode, compliant with Apple devices such
as iPod® and iPhone®
OUT Discharge Through CTLx=000 (TPS2540)
or DSC (TPS2541) Input
•
Available in 16-Pin QFN Package
CTL1-CTL3 logic inputs are used to select one of the
various charge modes provided by the TPS2540 and
TPS2541. These charge modes allow the host device
to actively select between Dedicated Charging Port
APPLICATIONS
•
•
•
USB Ports/Hubs
Notebook PCs
Universal Wall Charging Adapter
(DCP)
(wall-adapter
emulation),
Charging
Downstream Port (CDP) (active USB 2.0 data
communications with 1.5-A support), or Standard
Downstream Port (SDP) USB 2.0 Mode (active USB
2.0 data communications with 500-mA support). The
TPS2540/41 also integrates an auto-detect feature
that supports both DCP schemes for Battery
Charging Specification (BC1.2 (draft)) and the Divider
Mode without the need for outside user interaction.
TPS2540/41 RTE Package and Typical Application Diagram
TPS2540/41
RTE Package
(Top View)
To System Bus
To Peripheral
4.5 V to 5.5 V
FAULT Signal
1
IN
OUT 12
ILIM0 16
ILIM1 15
CUSB
VBUS
D-
D+
TPS2540
0.1 mF
RFAULT
10 kW
16
15
14
13
GND
2x
RILIM
1
2
3
4
IN
DM_OUT
DP_OUT
ILIM_SEL
12 OUT
11
10 DP_IN
13 FAULT
DM_IN
GND 14
Exposed
Thermal Die
ILIM Select
4
5
6
7
8
ILIM_SEL
Power Switch EN
Mode Select I/O
Mode Select I/O
Mode Select I/O
EN
DM_IN 11
DP_IN 10
9
N/C
CTL1
CTL2
CTL3
5
6
7
8
DM_OUT
DP_OUT
2
3
To Host Controller
UDG-10116
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
Apple, iPod, iPhone are registered trademarks of Apple Inc.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2010, Texas Instruments Incorporated