TPS2540, TPS2540A
TPS2541, TPS2541A
www.ti.com
SLVSAG2C –OCTOBER 2010–REVISED OCTOBER 2011
USB Charging Port Power Switch and Controller
Check for Samples: TPS2540, TPS2540A, TPS2541, TPS2541A
1
FEATURES
DESCRIPTION
The TPS2540/40A and TPS2541/41A are
combination of current-limited USB port power switch
with a USB 2.0 high-speed data line (D+/D-) switch
a
2
•
•
•
Meets Battery Charging Specification BC1.2
for DCP and CDP
Meets Chinese Telecommunications Industry
Standard YD/T 1591-2009
and
a USB charging port identification circuit.
Applications include notebook PCs and other
intelligent USB host devices. The wide bandwidth (2.6
GHz) data-line switch also features low capacitance
and low on resistance, allowing signals to pass with
minimum edge and phase distortion. The
TPS2540/40A/41/41A monitors D+ and D-, providing
the correct hand-shaking protocol with compliant
client devices.
Supports Sleep-Mode Charging for Most
Available Apple® Devices and/or BC1.2
Compliant Devices
•
Compatible With USB 2.0 and 3.0 Power
Switch Requirements
•
•
•
•
2.6-GHz Bandwidth USB 2.0 Data Switch
73-mΩ (typ.) High-Side MOSFET
The TPS2540/40A/41/41A supports the following
charging logic schemes:
Adjustable Current Limit up to 2.8 A (typical)
•
•
•
USB 2.0 BC1.2
Chinese Telecom Standard YD/T 1591-2009
Divider Mode, compliant with Apple devices such
as iPod® and iPhone®
OUT Discharge Through CTLx=000
(TPS2540/40A) or DSC (TPS2541/41A) Input
•
•
Longer Detach Detection Time (TPS2540A/41A)
Supporting Additional Legacy Devices
Available in 16-Pin QFN Package
CTL1-CTL3 logic inputs are used to select one of the
various charge modes provided by the TPS2540/40A
and TPS2541/41A. These charge modes allow the
host device to actively select between Dedicated
Charging Port (DCP) (wall-adapter emulation),
Charging Downstream Port (CDP) (active USB 2.0
data communications with 1.5-A support), or
Standard Downstream Port (SDP) USB 2.0 Mode
(active USB 2.0 data communications with 500-mA
support). The TPS2540/40A/41/41A also integrates
an auto-detect feature that supports both DCP
schemes for Battery Charging Specification (BC1.2)
and the Divider Mode without the need for outside
user interaction.
APPLICATIONS
•
•
•
USB Ports/Hubs
Notebook PCs
Universal Wall Charging Adapter
TPS2540/40A/41/41A RTE Package and Typical Application Diagram
To System Bus
To Peripheral
TPS2540/40A/41/41A
RTE Package
(Top View)
TPS2540/40A/41/41A
IN OUT 12
4.5 V to 5.5 V
1
CUSB
VBUS
D-
D+
0.1 mF
ILIM0 16
ILIM1 15
RFAULT
10 kW
GND
16
15
14
13
2x
RILIM
FAULT Signal
13 FAULT
1
2
3
4
IN
DM_OUT
DP_OUT
ILIM_SEL
12 OUT
11
10 DP_IN
GND 14
ILIM Select
4
5
6
7
8
ILIM_SEL
DM_IN
Exposed
Thermal Die
Power Switch EN
Mode Select I/O
Mode Select I/O
Mode Select I/O
EN/DSC
CTL1
DM_IN 11
DP_IN 10
9
N/C
CTL2
DM_OUT
DP_OUT
2
3
5
6
7
8
To Host Controller
CTL3
UDG-10116
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
Apple, iPod, iPhone are registered trademarks of Apple Inc.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2010–2011, Texas Instruments Incorporated