TPS2140, TPS2141
TPS2150, TPS2151
SLVS399 – JANUARY 2002
ADJUSTABLE LDO AND SWITCH WITH DUAL CURRENT LIMIT FOR
USB HIGH-POWER PERIPHERAL POWER MANAGEMENT
FEATURES
DESCRIPTION
D
D
D
D
D
D
D
D
D
D
D
Complete Power Management Solution for
USB High-Power Peripherals
The TPS2140/41/50/51 is a USB 1.0 and 2.0
Specification-compatible IC containing a dual-current-
limiting power switch and an adjustable low dropout
regulator (LDO). Both the switch and LDO limit inrush
current by controlling the turnon slew rate. The unique
dual-current-limiting feature of the switch allows USB
peripherals to utilize high-value capacitance at the
output of the switch, while keeping the inrush current
low. During turnon, the switch limits the current
delivered to the capacitive load to less than 100 mA.
When the output voltage from the switch reaches about
93% of the input voltage, the switch power good output
goes high, and the switch current limit increases to
800mA (minimum), at which point higher current loads
can be turned on. The higher current limit provides short
circuit protection while allowing the peripheral to draw
maximum current from the USB bus.
250 mA Low-Dropout Regulator (LDO) With
Enable and 325 mA (Typ) Current Limit
LDO Supports 2.7 V to 5.5 V V and 0.9 V to
IN
3.3 V Adjustable V
OUT
40 mΩ (Typ) High-Side MOSFET With Dual
Current Limit
Undervoltage Lockout and Power Good for
LDO and Switch
CMOS- and TTL-Compatible Enable Inputs
85 µA (Typ) Supply Current
5 µA (Typ) Standby Supply Current
Available in 14-Pin HTSSOP (PowerPAD )
–40°C to 85°C Ambient Temperature Range
Alternative to TPS2148/58 3.3-V LDO With
3.3-V Switch and 5-V Switch
The switch and LDO function independently, providing
flexibility in DSP applications requiring separate core
and I/O voltages. For example, in a DSP application
operating from a 3.3-V rail, the LDO can supply the DSP
core voltage down to 0.9 V, while the switch powers the
3.3-V (typical) DSP I/O supply. If supply sequencing is
required, the LDO power good output can be used to
enable the switch.
APPLICATIONS
D
High-Power USB Peripherals
– ADSL Modems
– Digital Still and PC Cameras
– Zip Drives
– Speakers
D
DSP Sequencing
AVAILABLE OPTIONS
PACKAGED DEVICES
PACKAGE
AND PIN
COUNT
TARGET
APPLICATION
T
A
DESCRIPTION
ACTIVE LOW
ACTIVE HIGH
(SWITCH)
(SWITCH)
AdjustableLDOand3.3Vswitchwithdualcurrent
limit
DSP
USB
HTSSOP-14
HTSSOP-14
TPS2140IPWP
TPS2150IPWP
TPS2151IPWP
–40°C to 85°C
Adjustable LDO and 5 V switch with dual current
limit
TPS2141IPWP
NOTE: All options available taped and reeled. Add an R suffix (e.g., TPS2140IPWPR)
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PowerPAD is a trademark of Texas Instruments.
USB is a trademark of Universal Serial Bus Association.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright 2002, Texas Instruments Incorporated
1
www.ti.com