TPF1441C
72M HD Composite Video Filter Driver with Clamped input Comparator
Feartures
Description
Wide Power Supply: +3.0V to +5.5V Single Supply
The TPF1441C is a low power, 72M HD composite video
filter and comparator on a single chip. Drawing less than 11.5mA
supply current over the full operating temperature range,
TP1441C operates from a single 3.0V to 5.5V power supply.
TPF1441C integrates high-performance low-cost 72MHz
composite video reconstruction filter, however it has very low
power consumption. The filter is sixth-order Butterworth
characteristics that are useful as digital-to-analog converter
(DAC) reconstruction filters or as analog-to-digital converter
(ADC) anti-aliasing filters. The HD filters can actually support
720p/1080p CVI/TVI/AHD platform. Moreover the filter can be
bypassed to support wider bandwidth video application.
The TPF1441C’s on-board comparator incorporates
3PEAK’s proprietary and patented design techniques to achieve
the ultimate combination of high-speed (68ns propagation delay
under 3.0~5.5V wide supply range) and low power consumption ,
The internal input hysteresis eliminates output switching due to
internal input noise voltage, reducing current draw. The PUSH-
PULL output supports rail-to-rail output swing, and interfaces
with CMOS/TTL logic.
Robust ESD Protection:
Robust 8kV – HBM and 2kV – CDM ESD Rating
Green Product, MSOP8/SOP8 Package
Video Filter:
HDTV Video Filter Support Composite 1080p/60
Optimized 6th-order Butterworth Video reconstruction filter:
HD Channel: -3dB BW 72MHz
Support Multiple Input Biasing:
Transparent Clamping for DC restoration
Provide 80-mV Level-Shift when DC-Coupled
Very Low Quiescent Current: 11.5 mA(at 3.3V, Typical)
6dB Gain(2V/V), Rail to Rail Output
AC- or DC-Coupled Output Driving Dual Video Loads (75Ω)
Comparator:
Fast Response Time: 68 ns Propagation Delay
Offset Voltage: ± 3.0 mV Maximum
Internal Hysteresis Ensures Clean Switching
Push-Pull, CMOS/TTL Compatible Output
Same DC clamping circuit as video input.
TPF1441C is available in SOP-8 package (TPF1441C-SR)
and MSOP-8 package (TP1441C-VR). Its operation
temperature range is from −40°C to +85°C.
Applications
Video Signal Amplification
Related Resources
Set-Top Box Video Driver
PV、DVD Player Video Buffer
Video Buffer for Portable or USB-Powered Video Devices
HDTV
AN-1201: Application notes of TPF1XX
Pin Configuration (Top View)
Pin Name
Pin Function
AIN
DOUT
VREF
HD IN
+VS
Non-Inverting Input of the Comparator
Comparator Output
1
2
3
4
8
7
6
5
AIN
VREF
DOUT
GND
Inverting Input of Comparator
HD video input, LPF = 72 MHz
Positive Power Supply
Ground
TPF1441C
NC
HD OUT
MSOP 8
+Vs
HD IN
GND
HD OUT
NC
HD video output, LPF = 72 MHz
Not connect
www.3peakic.com.cn
Rev.0
1 / 13