TPD4S014EVM

更新时间： 2024-11-16 08:40:03

品牌	Logo	应用领域
德州仪器 - TI		/
页数	文件大小	规格书
5页	301K
描述
Over-voltage protection functionality

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

TPD4S014EVM 数据手册

User's Guide

SLVU471–June 2011

TPD4S014 EVM

Introduction

The TPD4S014 is a single-chip solution for USB

charger port protection. This device offers low

capacitance TVS type ESD clamps for the D+, D–

and standard Capacitance for the ID pin. On the

VBUS pin, this device can handle over-voltage

protection up to 28V. The over voltage lock-out

feature ensures that, if there is a fault condition at

the VBUS line, the TPD4S014 is able to isolate

the VBUS line and protect the internal circuitry

from damage.

Similarly, the under voltage lock out feature

ensures that there is no power drain from the

internal VCC plane to external VBUS side in case

there is short to GND. There is a 16ms turn-on

delay after VBUS crosses the under voltage

lockout threshold, in order to let the voltage

stabilize before closing the switch. This function

acts as a deglitch filter and prevents unnecessary

switching if there is any ringing on the line during

connection.

Highlighted Features

•

Over-voltage protection functionality

Under voltage lockout functionality

USB connectors used for ease of use

LED indicating fault condition

Test point for EN and ACK signals

D+, D– lines are routed as differential pair

Bottom section of board can be used for measurement of bandwidth and ESD performance.

EVM Description and Configuration

The TPD4S014EVM consists of two separate sections, the TOP section and the BOTTOM section. Both

these sections are powered up by a 1.8V – 3.3V supply. This supply is used for three purposes:

1. To provide the HI and LO logic levels for the EN signal

2. To provide a pullup voltage for the open drain ACK signal

3. To power the fault indicator LED

The TOP section consists of the USB connectors. The connector on the Left (marked INPUT) connects to

the VBUS of the TPD4S014 and the one of the right (marked OUTPUT) connects to the VCC of the

SLVU471–June 2011

TPD4S014 EVM

Submit Documentation Feedback

12 3 4 5

中文翻译

下载PDF

与TPD4S014EVM相关器件

型号	品牌	获取价格	描述	数据表
TPD4S1394	TI	获取价格	FIREWIRE ESD CLAMP WITH LIVE-INSERTION DETECTION CIRCUIT
TPD4S1394_14	TI	获取价格	ESD CLAMP WITH LIVE-INSERTION DETECTION CIRCUIT
TPD4S1394DQLR	TI	获取价格	Firewire ESD clamp with li-Ve-insertion detection circuit 8-X2SON -40 to 85
TPD4S214	TI	获取价格	USB OTG Companion Device with VBUS Over Voltage, Over Current Protection, and Four Channel
TPD4S214AYFFR	TI	获取价格	USB OTG Companion Device with VBUS Over Voltage, Over Current Protection, and Four Channel
TPD4S214YFFR	TI	获取价格	USB OTG Companion Device with VBUS Over Voltage, Over Current Protection, and Four Channel
TPD4S311	TI	获取价格	TPD4S311, TPD4S311A USB Type-Câ¢ Port Protec
TPD4S311_V01	TI	获取价格	TPD4S311, TPD4S311A USB Type-Câ¢ Port Protec
TPD4S311A	TI	获取价格	TPD4S311, TPD4S311A USB Type-Câ¢ Port Protec
TPD4S311AYBFR	TI	获取价格	TPD4S311, TPD4S311A USB Type-Câ¢ Port Protec