TPA6133A2
www.ti.com
SLOS821 –JUNE 2013
138-mW DIRECTPATH™ STEREO HEADPHONE AMPLIFIER
Check for Samples: TPA6133A2
1
FEATURES
DESCRIPTION
The TPA6133A2 is a stereo DirectPath™ headphone
amplifier with GPIO control. The TPA6133A2 has
minimal quiescent current consumption, with a typical
IDD of 4.2 mA, making it optimal for portable
applications. The GPIO control allows the device to
be put in a low power shutdown mode.
2
•
DirectPath™ Ground-Referenced Outputs
–
–
–
–
Eliminates Output DC Blocking Capacitors
Reduces Board Area
Reduces Component Height and Cost
Full Bass Response Without Attenuation
The TPA6133A2 is a high fidelity amplifier with an
SNR of 93 dB. A PSRR greater than 100 dB enables
direct-to-battery connections without compromising
the listening experience. The output noise of 12
μVrms (typical A-weighted) provides a minimal noise
background during periods of silence. Configurable
differential inputs and high CMRR allow for maximum
noise rejection in the noisy environment of a mobile
device.
•
•
Power Supply Voltage Range: 2.5 V to 5.5 V
High Power Supply Rejection Ratio
(>100 dB PSRR)
•
Differential Inputs for Maximum Noise
Rejection (69 dB CMRR)
•
•
High-Impedance Outputs When Disabled
Advanced Pop and Click Suppression
Circuitry
TPA6133A2 is available in a 4 by 4 mm QFN
package.
•
•
GPIO Control for Shutdown
20 Pin, 4 mm x 4 mm QFN Package
APPLICATIONS
•
•
•
•
Mobile Phones
Audio Headsets
Notebook Computers
High Fidelity Applications
SIMPLIFIED APPLICATION DIAGRAM
GPIO
VBAT
2.2KQ
Audio Source
TEST1 TEST2
SD
0.47uF
0.47uF
LEFT_OUTM
LEFTINM
LEFTINP
HPLEFT
LEFT_OUTP
HPRIGHT
0.47uF
0.47uF
RIGHT_OUTM
RIGHT_OUTP
RIGHTINM
RIGHTINP
GND
GND
CPP
CPN
CPVSS
VDD
VDD
VBAT
1uF
1uF
1uF
1uF
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
DirectPath is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2013, Texas Instruments Incorporated