TP3
Vishay Sprague
www.vishay.com
Solid Tantalum Surface Mount Chip Capacitors
ANTAMOUNT™ Molded Case, High Performance, Automotive Grade
T
FEATURES
• AEC-Q200 qualified
• Low ESR
• 100 ꢀ surge current tested
(B, C, D, and E case sizes)
Available
• High ripple current carrying capability
Available
• Molded case available in five case codes
• Terminations: 100 ꢀ matte tin standard,
tin / lead available
• Compatible with “high volume” automatic pick
and place equipment
Available
• Meets EIA-535-BAAC mechanical and performance
requirements
• Compliant terminations
PERFORMANCE / ELECTRICAL
CHARACTERISTICS
www.vishay.com/doc?40215
• Moisture sensitivity level 1
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Operating Temperature: -55 °C to +125 °C
(above 85 °C, voltage derating is required)
Note
*
This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details
Capacitance Range: 0.10 μF to 470 μF
Capacitance Tolerance: 10 ꢀ, 20 ꢀ
Voltage Rating: 4 VDC to 50 VDC
APPLICATIONS
• Automotive
• Industrial
• General purpose
ORDERING INFORMATION
TP3
D
226
K
035
C
0500
AS
TYPE
CASE
CODE
CAPACITANCE CAPACITANCE
TOLERANCE
DC VOLTAGE
RATING AT +85 °C
TERMINATION /
PACKAGING
ESR
SPECIFICATION
OPTION
See Ratings
and Case
This is
K = 10 ꢀ
M = 20 ꢀ
This is expressed
in V. To complete
the three-digit
block, zeros
Matte tin
C = 7" (178 mm) reel
D = 13" (330 mm) reel
V = 7" (178 mm) reel,
dry pack
Maximum
100 kHz ESR
0500 = 500 mΩ
5000 = 5.0 Ω
10R0 = 10.0 Ω
AS = standard
expressed
Codes table in picofarads.
The first two
digits are the
significant
precede the
voltage rating.
A decimal point is
indicated by an “R”
(6R3 = 6.3 V)
U = 13" (330 mm) reel,
dry pack
figures.
The third is
the number of
zeros to follow.
Tin / lead
E = 7" (178 mm) reel
F = 13" (330 mm) reel
T = 7" (178 mm) reel,
dry pack
W = 13" (330 mm) reel,
dry pack
Notes
•
We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size.
Voltage substitutions will be marked with the higher voltage rating
•
Dry pack as specified in J-STD-033 for MSL3. Applicable for D and E cases only
Revision: 22-Jun-17
Document Number: 40116
1
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000