TP1561AL1/TP1562AL1/TP1564AL1-S
6-MHz, 600-μA, RRIO, Op Amps
Features
Description
The TP156xAL1 series of products are CMOS dual
and quad RRIO op-amps with low offset, low power
and stable high-frequency response. They incorporate
3PEAK’s proprietary and patented design techniques to
achieve very good AC performance with 6-MHz bandwidth,
4.5-V/μs slew rate, and low distortion while drawing only
600 μA of quiescent current per amplifier. The input
common-mode voltage range extends 300 mV beyond
V− and V+, and the outputs swing rail-to-rail. The
TP156xAL1 family can be used as plug-in replacements
for many commercially available op-amps to reduce
power consumption and improve input/output range and
performance.
Supply Voltage: 2.5 V to 6 V
•
•
•
•
•
•
•
•
Low Supply Current: Typical 600-μA per Channel
Rail-to-Rail Input and Output
Bandwidth: Typical 6 MHz
Slew Rate: Typical 4.5 V/μs
Excellent EMI Suppress Performance
Offset Voltage: Maximum ±3 mV
Offset Voltage Temperature Drift: Typical 1 μV/°C
Low Noise: Typical 19 nV/√Hz at 1 kHz
•
•
High Output Capability: Typical 100 mA
−40°C to 125°C Operation Temperature Range
•
•
The combination of features makes the TP156xAL1 ideal
choice for motor control and automotive applications. The
ability to swing rail-to-rail at the inputs and outputs enables
designers to buffer CMOS DACs, ASICs, or other wide
output swing devices in single-supply systems.
Qualified for Automotive Applications with AEC-Q100
Reliability Test
Applications
Automotive Motor Control
•
On-Board Charger
•
Typical Application Circuit
www.3peak.com
1 / 22
AA20221102A3