TP(HALA P8) SEMiX 3s
Characteristics
Symbol Conditions
min.
typ.
max.
Unit
Characteristics of printing process
wtp
material weight
130
160
190
mg
Storage conditions
tstg
Tstg
RHstg
storage time
storage temperature
storage humidity
12
40
85
month
°C
%
5
10
TIM material characteristic
SEMiX® 3
γtp
specific gravity
resistivity
2
g/cm3
Ω/cm
>50*106
Rtp
W/
λtp
thermal conductivity
3.4
Pre applied phase change
material HALA TPC-Z-PC-P8
(silicone free)
(K*m)
Absolute Maximum Ratings
Symbol Conditions
Values
Unit
Continous operation conditions
TC op
TP(HALA P8) SEMiX 3s
105
°C
*IMPORTANT INFORMATION AND WARNINGS
Features
The specifications of SEMIKRON products may not be considered as guarantee or assurance
of product characteristics ("Beschaffenheitsgarantie"). The specifications of SEMIKRON
products describe only the usual characteristics of products to be expected in typical
applications, which may still vary depending on the specific application. Therefore, products
must be tested for the respective application in advance. Application adjustments may be
necessary. The user of SEMIKRON products is responsible for the safety of their applications
embedding SEMIKRON products and must take adequate safety measures to prevent the
applications from causing a physical injury, fire or other problem if any of SEMIKRON products
become faulty. The user is responsible to make sure that the application design is compliant
with all applicable laws, regulations, norms and standards. Except as otherwise explicitly
approved by SEMIKRON in a written document signed by authorized representatives of
SEMIKRON, SEMIKRON products may not be used in any applications where a failure of the
product or any consequences of the use thereof can reasonably be expected to result in
personal injury. No representation or warranty is given and no liability is assumed with respect
to the accuracy, completeness and/or use of any information herein, including without limitation,
warranties of non-infringement of intellectual property rights of any third party. SEMIKRON
does not assume any liability arising out of the applications or use of any product; neither does
it convey any license under its patent rights, copyrights, trade secrets or other intellectual
property rights, nor the rights of others. SEMIKRON makes no representation or warranty of
non-infringement or alleged non-infringement of intellectual property rights of any third party
which may arise from applications. Due to technical requirements our products may contain
dangerous substances. For information on the types in question please contact the nearest
SEMIKRON sales office. This document supersedes and replaces all information previously
supplied and may be superseded by updates. SEMIKRON reserves the right to make changes.
• Inhomogeneous honeycomb structure
• Optimized layer thickness
• Enhanced heat dissipation
• High process reliability due to
automated screen/stencil printing
process
• Phase Change Material
inhomog. honeycomb structure
© by SEMIKRON
Rev. 2.0 – 24.01.2017
1