TOP242-250
®
TOPSwitch-GX Family
Extended Power, Design Flexible,
®
EcoSmart, IntegratedOff-line Switcher
Product Highlights
+
AC
IN
DC
Lower System Cost, High Design Flexibility
OUT
-
• Extended power range for higher power applications
• No heatsink required up to 30 W using P package
• Features eliminate or reduce cost of external components
• Fully integrated soft-start for minimum stress/overshoot
• Externally programmable accurate current limit
• Wider duty cycle for more power, smaller input capacitor
• Separate line sense and current limit pins on Y/R/F packages
• Line under-voltage (UV) detection: no turn off glitches
• Line overvoltage (OV) shutdown extends line surge limit
D
S
L
CONTROL
C
TOPSwitch-GX
X
F
PI-2632-060200
• Line feed forward with maximum duty cycle (DCMAX
reduction rejects line ripple and limits DCMAX at high line
• Frequency jittering reduces EMI and EMI filtering costs
• Regulates to zero load without dummy loading
)
Figure 1. Typical Flyback Application.
OUTPUT POWER TABLE
• 132 kHz frequency reduces transformer/power supply size
230 VAC ±15%4
85-265 VAC
• HalffrequencyoptioninY/R/Fpackagesforvideoapplications
• Hysteretic thermal shutdown for automatic fault recovery
• Large thermal hysteresis prevents PC board overheating
PRODUCT3
Open
Open
Adapter1
Adapter1
Frame2
Frame2
TOP242 P or G
TOP242 R
TOP242 Y or F
9 W
21 W
10 W
15 W
22 W
22 W
6.5 W
11 W
7 W
10 W
14 W
14 W
EcoSmart - Energy Efficient
• Extremely low consumption in remote off mode
(80 mW @ 110 VAC, 160 mW @ 230 VAC)
• Frequency lowered with load for high standby efficiency
• Allows shutdown/wake-up via LAN/input port
TOP243 P or G
TOP243 R
TOP243 Y or F
13 W
29 W
20 W
25 W
45 W
45 W
9 W
17 W
15 W
15 W
23 W
30 W
TOP244 P or G
TOP244 R
TOP244 Y or F
16 W
34 W
30 W
28 W
50 W
65 W
11 W
20 W
20 W
20 W
28 W
45 W
Description
TOPSwitch-GX uses the same proven topology as TOPSwitch, cost
effectively integrating the high voltage power MOSFET, PWM
control, fault protection and other control circuitry onto a single
CMOS chip. Many new functions are integrated to
reduce system cost and improve design flexibility, performance
and energy efficiency.
TOP245 P
TOP245 R
TOP245 Y or F
19 W
37 W
40 W
30 W
57 W
85 W
13 W
23 W
26 W
22 W
33 W
60 W
TOP246 R
TOP246 Y or F
40 W
60 W
64 W
125 W
26 W
40 W
38 W
90 W
TOP247 R
TOP247 Y or F
42 W
85 W
70 W
165 W
28 W
55 W
43 W
125 W
Depending on package type, either 1 or 3 additional pins over the
TOPSwitch standard DRAIN, SOURCE and CONTROLterminals
allow the following functions: line sensing (OV/UV, line feed-
forward/DCMAX reduction), accurate externally set current limit,
remote ON/OFF, synchronization to an external lower frequency,
and frequency selection (132 kHz/66 kHz).
TOP248 R
TOP248 Y or F
43 W
75 W
30 W
70 W
48 W
155 W
105 W 205 W
44 W 79 W
120 W 250 W
45 W 82 W
135 W 290 W
TOP249 R
TOP249 Y or F
31 W
80 W
53 W
180 W
TOP250 R
TOP250 Y or F
32 W
90 W
55 W
210 W
All package types provide the following transparent features: Soft-
start, 132 kHz switching frequency (automatically reduced at light
load), frequency jittering for lower EMI, wider DCMAX, hysteretic
thermal shutdown and larger creepage packages. In addition, all
critical parameters (i.e. current limit, frequency, PWM gain) have
tighter temperature and absolute tolerance, to simplify design and
optimize system cost.
Table 1. Notes: 1. Typical continuous power in a non-ventilated
enclosed adapter measured at 50 °C ambient. 2. Maximum practical
continuous power in an open frame design at 50 °C ambient. See
Key Applications for detailed conditions. 3. See Part Ordering
Information. 4. 230 VAC or 100/115 VAC with doubler.
September 2003