This product is not recommended for new designs.
TOP221-227
TOPSwitch-II Family
Three-Terminal Off-Line PWM Switch
Product Highlights
AC
IN
• Lowest cost, lowest component count switcher solution
• Cost competitive with linears above 5 W
• Very low AC/DC losses – up to 90% efficiency
• Built-in Auto-restart and Current limiting
• Latching Thermal shutdown for system level protection
• Implements Flyback, Forward, Boost or Buck topology
• Works with primary or opto feedback
• Stable in discontinuous or continuous conduction mode
• Source connected tab for low EMI
D
S
CONTROL
C
TOPSwitch
• Circuit simplicity and Design Tools reduce time to market
Description
PI-1951-091996
The second generation TOPSwitch™-II family is more cost
effective and provides several enhancements over the first
generation TOPSwitch family. The TOPSwitch-II family
extends the power range from 100W to 150W for 100/115/
230 VAC input and from 50W to 90W for 85-265 VAC univer-
sal input. This brings TOPSwitch technology advantages
to many new applications, i.e. TV, Monitor, Audio amplifiers,
etc. Many significant circuit enhancements that reduce the
sensitivity to board layout and line transients now make the
design even easier. The standard 8L PDIP package option
Figure 1. Typical Flyback Application.
reduces cost in lower power, high efficiency applications.
The internal lead frame of this package uses six of its pins to
transfer heat from the chip directly to the board, eliminating
the cost of a heat sink. TOPSwitch incorporates all functions
necessary for a switched mode control system into a three
terminal monolithic IC: power MOSFET, PWM controller, high
voltage start up circuit, loop compensation and fault protec-
tion circuitry.
Output Power Table
TO-220 (Y) Package1
8L PDIP (P) or 8L SMD (G) Package2
Wide Range Input
85 to 265 VAC
Single Voltage Input3
Single Voltage Input3
100/115/230 VAC 15ꢀ
Wide Range Input
85 to 265 VAC
PART
ORDER
NUMBER
PART
ORDER
NUMBER
100/115/230 VAC 15ꢀ
4,6
4,6
5,6
5,6
PMAX
PMAX
PMAX
PMAX
12 W
25 W
7 W
TOP221YN
TOP222YN
TOP223YN
TOP224YN
TOP225YN
TOP226YN
TOP227YN
9 W
6 W
TOP221PN or TOP221GN
TOP222PN or TOP222GN
15 W
30 W
45 W
60 W
75 W
90 W
15 W
25 W
30 W
10 W
15 W
20 W
TOP223PN or TOP223GN
TOP224PN or TOP224GN
50 W
75 W
100 W
125 W
150 W
Notes: 1. Package outline: TO-220/3 2. Package Outline: DIP-8 or SMD-8 3. 100/115 VAC with doubler input 4. Assumes appro-
priate heat sinking to keep the maximum TOPSwitch junction temperature below 100 °C. 5. Soldered to 1 sq. in. (6.45 cm2), 2 oz.
copper clad (610 gm/m2) 6. PMAX is the maximum practical continuous power output level for conditions shown. The continuous
power capability in a given application depends on thermal environment, transformer design, efficiency required, minimum spec-
ified input voltage, input storage capacitance, etc. 7. Refer to key application considerations section when using TOPSwitch-II in
an existing TOPSwitch design.
www.power.com
August 2016
This Product is Covered by Patents and/or Pending Patent Applications.
5秒后页面跳转
全球首块英伟达H200交付 黄仁勋“送货上门”
常用8脚开关电源芯片型号大全
74HC04芯片引脚图及功能、应用电路图讲解
CR6842芯片参数、引脚配置、应用电路图详解
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
