TXZ+ Fmaily
TMPM3H Group(1)
Datasheet
CMOS Digital Integrated Circuit Silicon Monolithic
TMPM3H Group(1)
General Description
LQFP144
(20x20 mm, 0.5 mm pitch)
LQFP128
(14x14 mm, 0.4 mm pitch)
LQFP100
(14x14 mm, 0.5 mm pitch)
LQFP80
●
Arm®Cortex®-M3 core, operating frequency: 1 to 120 MHz,
opetating voltage: 2.7 to 5.5V
(12x12 mm, 0.5 mm pitch)
LQFP64
(10x10 mm, 0.5 mm pitch)
●
●
Code flash: 256KB to 512KB, Data flash: 32KB
Package: 64-pin to 144-pin, 7 types of packages are available.
LQFP128
(14x20 mm, 0.5 mm pitch)
QFP100
(14x20 mm, 0.65 mm pitch)
Applications
Widely used for consumer products and industrial products including home appliances,
OA equipment, household equipment, AV devices, and motor control devices.
Features
● Arm Cortex-M3 core
● Universal Asynchronous Receiver Transmitter (UART): 7 to 8
channels
-
-
Operating frequency: 1 to 120 MHz
Memory Protection Unit (MPU)
-
Up to 2.5Mbps, FIFO (Transmission 9bits × 8,
Reception 9bits × 8 )
● Operating voltage and Low-power consumption operation
● Serial Peripheral Interface (TSPI): 1 to 5 channels
-
-
-
Operating voltage: 2.7 to 5.5V
-
SIO/SPI mode, up to 20MHz, FIFO (Transmission 16bits × 8,
Reception 16bits × 8), sector/frame mode
Low-power consumption operation: IDLE, STOP1, STOP2
Operating temperature: -40 to +105°C
● I2C Interface
● Internal memory
-
I2C interface (I2C): 2 to 4 channels
-
-
-
-
Code flash: 256KB to 512 KB, rewritable up to 100,000 times
Data flash: 32 KB, rewritable up to 100,000 times
Multi Master, Release function for Low Power Mode
-
I2C interface Version A (EI2C): 2 to 4 channels
Multi Master, Support 10-bit Slave Addressing
Release function for Low Power Mode
Data flash is rewritable in parallel with instruction execution
RAM: 64KB and Backup RAM: 2 KB
Both RAMs have party bit.
● Comparator: 1 channel. EMG signal output to A-PMD
● 8-bit DA Converter (DAC): 2 channels
● Clock
-
External High-speed Oscillator: 6 MHz to 12 MHz (Ceramic,
Crystal)
● 12-bit ADC (ADC): 12 to 21 channels analog inputs
-
Built-in sample-and-hold circuit
Conversion time: 1.5µs@SCLK = 20MHz,
1.0µs@SCLK = 30MHz
-
-
External High-speed clock input: 6 to 20 MHz
Internal High-speed Oscillator (IHOSC1): 10 MHz, user trimming
function
-
Support self-diagnosis function
-
-
PLL: 120 MHz output
● Advanced Programmable Motor Control Circuit (A-PMD): 1
External Low-speed Oscillator: 32.768kHz
channel
● Oscillation Frequency Detector (OFD): Abnormal system clock
-
-
3-phase complementary PWM output, Synchronized with 12-bit
ADC
detection
● Voltage Detection circuit (LVD): 8 level, Generate interrupts and
Emergency stop function by external inputs (EMG0 pin, OVV0
pin)
reset outputs
● Interrupt
● Advanced Encoder Input Circuit (A-ENC): 1 channel
Encoder/sensor (3 types)/Timer/Phase counter mode
● 32-bit Timer Event Counter (T32A)
-
External factors: 12 to 23
-
(External pins: 12 to 34 pins with DNF)
-
Internal factors: 128 to 151
-
-
8 channels as 32-bit timer, 16 channels as 16-bit timer
● I/O ports: 57 to 135 (Include Input only: 4, Output only: 1)
Pull-up/pull-down resistor, Open-drain, 5V-tolerant
Interval timer, event counter, input capture, phase difference
input, PPG output, sync start, trigger start
-
● On Chip Debug (JTAG/SW)
● Trigger Selector (TRGSEL)
● Real Time Clock (RTC): 1 channel
● Watchdog Timer (SIWDT): 1 channel
-
Expand Trigger request for DMAC, Timer counter and so on.
● DMA Controller (DMAC)
DMA requests: 2units, 54 to 64 factors, internal/external triggers
● LCD Display Controller (DLCD)
Non-Bias Drive: 40 segments × 4 commons (Max)
-
-
Clock system other than the system clock can be selected
Clear window, interrupts and reset output
-
● Remote Control Signal Preprocessor (RMC): 1 channel
● CRC Calculation Circuit (CRC): 1channel, CRC32, CRC16
-
Start of commercial production
2022-05
© 2021-2023
Toshiba Electronic Devices & Storage Corporation
1 / 117
2023-07-07
Rev.2.3