TMPM3H Group(1)
Datasheet
CMOS Digital Integrated Circuit Silicon Monolithic
VQFN48
6×6mm 0.4mm pitch
TMPM3H Group(1)
LQFP32
LQFP48
7x7mm 0.8mm pitch
7x7mm 0.5mm pitch
LQFP44 10x10mm 0.8mm pitch
LQFP52 10x10mm 0.65mm pitch
LQFP64 10x10mm 0.5mm pitch
LQFP64 14x14mm 0.8mm pitch
LQFP80 12x12mm 0.5mm pitch
LQFP80 14x14mm 0.65mm pitch
LQFP100 14x14mm 0.5mm pitch
General Description
●
Arm ® Cortex®-M3 core. Operation frequency: 1 to 40 MHz.
Operation voltage: 2.7 to 5.5V
●
●
Code flash: 32 to 128KB. Data flash: 8 to 32KB.
Package: 32-pin to 100-pin. 11 types of packages are available.
QFP100 14x20mm 0.65mm pitch
Applications
Widely used for consumer products and industrial products including home appliances, OA equipment, household
equipment, AV devices, and motor control devices.
Features
● Arm Cortex-M3 core
● Asynchronous Serial Interface(UART): 2 to 3 channels
‒ Operation frequency: 1 to 40 MHz
‒ Memory Protection Unit (MPU)
‒ 2.5Mbps(Max),FIFO(Send 8stage, Receive 8stage)
● Serial Peripheral Interface(TSPI): 1 to 2 channels
● Low-power consumption mode
‒
SIO/SPI mode,20Mbps(MAX),FIFO(Send 16bitsx8,Receive
16bitsx8)
‒ Operation voltage: 2.7 to 5.5V
‒ 100µA/MHz (at basic operation)
‒ Low-power consumption operation: IDLE, STOP1,STOP2
● I2C Interface(I2C):1 to 3 channels
‒ Multi Master, Fm+, Release function for Low Power Mode
● 8-bit DA converter(DAC): 0 to 2 channels
● 12-bit ADC(ADC): 4 to 16 channel inputs
‒ Sample-and-hold circuit
● Operation temperature: -40 to +85°C
● Internal memory
‒ Code flash: 32 to 128 KB, rewritable up to 10,000 times
‒ Data flash: 8 to 32 KB, rewritable up to 100,000 times
‒ Data flash is rewritable in parallel with instruction execution
‒ RAM: 6 to 16KB and Backup RAM 2 KB
● Clock
‒ Conversion time: 1.5µs@40MHz
‒ Self-diagnosis support function
● Motor control circuit (PMD+): 1 channel
‒ 3 phase PWM output, Synchronized with 12-bit ADC
‒ Emergency stop function by external inputs (EMG_N pin,
OVV_N pin)
‒ External high-speed oscillator: 6 MHz to 12 MHz(Ceramic,
Crystal)
● Advanced Encoder input circuit (A-ENC): 1 channel
‒ Encoder/sensor (3 types)/Timer /Phase counter mode
● 32bit Timer Event Counter (T32A)
‒ External high-speed clock input: 6 to 20 MHz
‒ Internal high-speed oscillator (IHOSC1): 10 MHz, user
trimming function
‒ PLL: 40 MHz output
‒ 12 channels as 16-bit Timers:6 channels as 32-bits Timers
‒ External low-speed oscillator: 32.768kHz
‒ Interval Timer, event counter, input capture, phase difference
input, PPG output, Sync Start, Trigger Start
● Oscillation frequency detection (OFD): Abnormal system clock
detection
● Realtime Clock (RTC): 0 to 1 channel
● Watchdog timer (SIWDT): 1 channel
Low-Voltage Detection (LVD): 8 level, Generate interrupts and
reset outputs
‒ Clock system other than the system clock can be selected,
‒ Clear window, interrupts and reset output
● Remote controller reception circuit (RMC): 1 channel
● Supports boundary scan(BSC)
Interruption
‒ External: 6 to 16 factors, with DNF
‒ internal: 85 to 100 factors
● I/O ports: GPIO:24 to 87(Input:2 to 4,Output:1)
‒ pull-up/-down resistor, Open-drain, 5V-tolerant
● On chip Debug(JTAG/SW)
● Trigger Selector(TRGSEL)
‒ Expand Trigger request for DMAC, Timer, others
● DMA Controller(DMAC)
‒ DMA requests: 32 factors, internal/external triggers
Start of commercial production
2017-06
2019-07-10
1 / 109
Rev.4.1
© 2017-2019
Toshiba Electronic Devices & Storage Corporation