TOSHIBA
TLCS-90 Series
TMP90PH44
The function of this device is exactly the same as the
CMOS 8–Bit Microcontrollers
TMP90PH44N/TMP90PH44F
1. Outline and Characteristics
The TMP90PH44 is a system evaluation LSI having a built-in
One-Time PROM for (16K byte) for TMP90C844.
A programming and verification for the internal PROM is
achieved by using a general EPROM programmer with an
adapter socket.
TMP90C844 by programming to the internal PROM.
The different points between TMP90PH44 and
TMP90C844 are the memory size (ROM/RAM).
The TMP90PH44N is in a Shrink Dual Inline Package.
(SDIP64-P-750)
The TMP90PH44F is in a Quad Flat Package.
(QFP64-P-1420A)
The following are the memory map of TMP90PH44 and
TMP90C844.
Figure 1.1. TMP90PH44
Figure 1.2. TMP90C844
Adapter Socket
Parts No.
ROM
RAM
Package
No.
BM1148
64-SDIP
TMP90PH44N
TMP90PH44F
(Under Development)
OTP
16384 x 8bit
512 x 8bit
BM1149
64-QFP
(Under Development)
The information contained here is subject to change without notice.
The information contained herein is presented only as guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties
which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. These TOSHIBA products are intended for usage in general electronic
equipments (office equipment, communication equipment, measuring equipment, domestic electrification, etc.) Please make sure that you consult with us before you use these TOSHIBA products in equip-
ments which require high quality and/or reliability, and in equipments which could have major impact to the welfare of human life (atomic energy control, spaceship, traffic signal, combustion control, all types
of safety devices, etc.). TOSHIBA cannot accept liability to any damage which may occur in case these TOSHIBA products were used in the mentioned equipments without prior consultation with TOSHIBA.
TOSHIBA CORPORATION
1/20