TMP88CS38/CM38A/CP38A
CMOS 8-Bit Microcontroller
TMP88CS38NG/FG, TMP88CM38ANG/F, TMP88CP38ANG/F
The TMP88CS38/CM38A/CP38A is the high speed and high performance 8-bit single chip
microcomputers. This MCU contain CPU core, ROM, RAM, input/output ports, four multi-function
timer/counters, serial bus interface, on-screen display, PWM output, 8-bit AD converter, and
remote control signal preprocessor on chip.
Product No.
ROM
RAM
Package
OTP MCU
TMP88CS38NG/FG
TMP88CM38ANG/F
TMP88CP38ANG/F
64 K × 8 bits
32 K × 8 bits
48 K × 8 bits
2 K × 8 bits
P-SDIP42-600-1.78
TMP88PS38NG/FG
P-QFP44-1414-0.80K
1.5 K × 8 bits
Features
♦
♦
♦
8-bit single chip microcomputer TLCS-870/X series
Instruction execution time: 0.25 μs (at 16 MHz)
842 basic instructions
•
•
•
•
Multiplication and division (8 bits × 8 bits, 16 bits × 8 bits, 16 bits/8 bits)
Bit manipulations (Set/clear/complement/move/test/exclusive or)
16-bit data and 20-bit data operations
1-byte jump/subroutine call (Short relative jump/vector call)
♦
♦
I/O ports: Maximum 33 (High current output: 4)
17 interrupt sources: External 6, internal 11
•
•
•
All sources have independent latches each, and nested interrupt control is available.
Edge-selectable external interrupts with noise reject
High-speed task switching by register bank changeover
♦
♦
ROM corrective function
Two 16-bit timer/counters: TC1, TC2
•
Timer, event counter, pulse width measurement, external trigger timer, window modes
030619EBP1
• The information contained herein is subject to change without notice.
• The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by
TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by
implication or otherwise under any patent or patent rights of TOSHIBA or others.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general
can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer,
when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid
situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to
property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most
recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for
Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc..
• The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal
equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are
neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunctionor
failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control
instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made
at the customer’s own risk.
• The products described in this document are subject to the foreign exchange and foreign trade laws.
• TOSHIBA products should not be embedded to the downstream products which are prohibited to be produced and sold, under any law
and regulations.
• For a discussion of how the reliability of microcontrollers can be predicted, please refer to Section 1.3 of the chapter entitled Quality
and Reliability Assurance/Handling Precautions.
Purchase of TOSHIBA I2C components conveys a license under the Philips I2C Patent Rights to use
these components in an I2C system, provided that the system conforms to the I2C Standard
Specification as defined by Philips.
2005-05-18
88CS38-1