APPLICABLE STANDARD
OPERATING
TEMPERATURE RANGE
RATING
STORAGE
TEMPERATURE RANGE
-55C TO 85C
-25C TO 60C
VOLTAGE
125 V AC
CURRENT
0.5 A
SPECIFICATIONS
TEST METHOD
ITEM
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION
VISUALLY AND BY MEASURING INSTRUMENT.
CONFIRMED VISUALLY.
ACCORDING TO DRAWING.
X
X
X
X
MARKING
ELECTRIC CHARACTERISTICS
200 m MAX.
CONTACT RESISTANCE
100 mA MAX (DC OR 1000 Hz AC).
X
X
MEASUREMENT POINT
100 mm
PLUG
MODULAR CABLE
RECEPTACLE
(ONE EXAMPLE OF CONNECTOR CONFIGURTION
IS SHOW N.)
INSULATION RESISTANCE
VOLTAGE PROOF
100
V DC.
100
M MIN.
X
X
X
X
500 V AC FOR 1 min.
NO FLASHOVER OR BREAKDOWN.
MECHANICAL CHARACTERISTICS
MECHANICAL OPERATION
200 TIMES INSERTIONS AND EXTRACTIONS.
1) CONTACT RESISTANCE: 220 m MAX.
2) NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
X
X
-
-
VIBRATION
FREQUENCY 10 TO 55 Hz
SINGLE AMPLITUDE 0.75 mm
1) NO ELECTRICAL DISCONTINUITY OF 5s.
2) CONTACT RESISTANCE: 220 m MAX.
3) NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
AT
490 m/s2 DURATION OF PULSE 11 ms
AT TIMES IN 3 BOTH AXIAL DIRECTIONS.
5
min. / CYCLE, 10 CYCLES
SHOCK
X
X
3
-
-
ENVIRONMENTAL CHARACTERISTICS
DAMP HEAT
1) CONTACT RESISTANCE: 220 m MAX.
2) INSULATION RESISTANCE:
EXPOSED AT +40 C, 90~95 , 500 h
(STEADY STATE)
1
M MIN. (AT HIGH HUMIDITY)
10 M MIN. (AT DRY)
3) NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
RAPID CHANGE OF
TEMPERATURE
1) CONTACT RESISTANCE: 220 m MAX.
2) INSULATION RESISTANCE: 100 M MIN.
3) NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
TEMPERATURE –55±3→5~35→85±2→5~35
℃
X
-
TIME
30 to 35 →5MAX→ 30 to 35 →5MAX min.
UNDER 5 CYCLES.
CORROSION SALT MIST
EXPOSED IN 5 % SALT WATER SPRAY FOR
48 h.
1) CONTACT RESISTANCE: 220 m MAX.
2) NO HEAVY CORROSION.
X
X
X
X
-
-
-
-
RESISTANCE TO
SOLDERING HEAT
SOLDERABILITY
SOLDER TEMPERATURE, 260 ± 5 ℃ FOR
IMMERSION, DURATION 10 ± 1 S. (FLOW)
NO DEFORMATION OF CASE AND EXCESSIVE
LOOSENESS OF THE TERMINALS.
95 %MIN. OF SOLDER IMMERSED AREA
SHALL BE COVERED NEW SOLDER COATING.
NO DEFORMATION OF CASE AND EXCESSIVE
LOOSENESS OF THE TERMINALS.
SOLDERED AT SOLDER TEMPERATURE, 245 ± 2 ℃
FOR IMMERSION, DURATION 3 ± 1 S. (FLOW)
SOLDERRING IRON TEMPERATURE, 350 ± 5 ℃,
RESISTANCE TO
SOLDERING IRON HEAT
DURATION
5
s max.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
TS.ITO
CHECKED
TU.TANIGUCHI
RI.TAKAYASU
AH.KODAMA
TS.ITO
DATE
1
2
DIS-E-00002708
20191127
20180611
20180611
20180611
20180611
△
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
Unless otherwise specified, refer to IEC 60512.
TS.ITO
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
CODE NO.
ELC-021570-20-00
TM5RE1-64(20)
SPECIFICATION SHEET
1
△
1/1
HIROSE ELECTRIC CO., LTD.
CL222-0540-1-20
FORM HD0011-2-1