APPLICABLE STANDARD
1
TIA / EIA – 568 – B.2 CAT5e
OPERATING
STORAGE
TEMPERATURE RANGE
-55 C TO 85 C
-25 C TO 60 C
3
2
3
TEMPERATURE RANGE
RATING
AC 125 V
1 A
VOLTAGE
CURRENT
SPECIFICATIONS
TEST METHOD
ITEM
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION
VISUALLY AND BY MEASURING INSTRUMENT.
CONFIRMED VISUALLY.
ACCORDING TO DRAWING.
X
X
X
X
MARKING
ELECTRIC CHARACTERISTICS
230 m MAX.
CONTACT RESISTANCE
100 mA MAX (DC OR 1000 Hz).
X
X
(ONE EXAMPLE CONNECTOR CONFIGURTION
IS SHOW N.)
100 V DC.
INSULATION RESISTANCE
100 M MIN.
X
X
X
X
VOLTAGE PROOF
500 V AC FOR 1 min.
NO FLASHOVER OR BREAKDOWN.
(CONTACT TO CONTACT)
VOLTAGE PROOF
1500 V AC FOR 1 min.
NO FLASHOVER OR BREAKDOWN.
43 dB MIN
X
X
-
-
(CONTACT TO SHIELD)
NEAR END CROSSTALK
(NEXT) LOSS
MEASURED MINIMUM NEXT LOSS FOR EACH.
PAIR COMBINATION AT 100 Hz.
MECHANICAL CHARACTERISTICS
MECHANICAL OPERATION
200 TIMES INSERTIONS AND EXTRACTIONS.
1)CONTACT RESISTANCE: 250 m MAX.
2)NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
X
-
VIBRATION
SHOCK
FREQUENCY 10 TO 55 Hz, HALF AMPLITUDE
0.75 mm, FOR 10 CYCLES IN 3 DIRECTIONS.
490 m/s2 DIRECTIONS OF PULSE 11 ms
AT 3 TIMES FOR 3 DIRECTIONS.
1)NO ELECTRICAL DISCONTINUITY OF 5 s.
2)CONTACT RESISTANCE: 250 m MAX.
3)NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
X
X
-
-
ENVIRONMENTAL CHARACTERISTICS
DAMP HEAT
EXPOSED AT +40 C, 90 TO 95 , 500 h.
1)CONTACT RESISTANCE: 250 m MAX.
X
-
-
(STEADY STATE)
2)INSULATION RESISTANCE:
1 M MIN. (AT HIGH HUMIDITY)
10 M MIN. (AT DRY)
3)NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
RAPID CHANGE OF
TEMPERATURE
TEMPERATURE -55±3 → 5 TO 35 → 85±2 → 5 TO 35 C 1)CONTACT RESISTANCE: 250 m MAX.
X
TIME
30 → 5 MAX → 3 0 → 5 MAX min
2)INSULATION RESISTANCE: 100 M MIN.
3)NO DAMAGE, CRACK AND LOOSENESS
OF PART
UNDER 5 CYCLES.
CORROSION SALT MIST
EXPOSED IN 5 % SALT WATER SPRAY FOR 48 h.
1)CONTACT RESISTANCE: 250 m MAX.
2)NO HEAVY CORROSION.
X
X
X
-
-
-
RESISTANCE TO
SOLDERING HEAT
SOLDERABILITY
SOLDER TEMPERATURE, 260 ± 3 C FOR IMMERSION,
DURATION 5 TO 6 S. (FLOW)
NO DEFORMATION OF CASE AND EXCESSIVE
LOOSENESS OF THE TERMINALS.
MIN. 95 % OF SOLDER IMMERSED AREA
SHALL BE COVERED NEW SOLDER COATING.
SOLDERED AT SOLDER TEMPERATURE, 245 C
FOR IMMERSION, DURATION 3 S. (FLOW)
THE OPERATION TEMPERATURE INCLUDES THE RISE
BY CURRENT CARRYING.
1
APPLICABLE PLUG CONNECTOR:TM21P-88P.
2
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
3
△
1
DIS-E-00002148
SH.KOYAMA
TU.TANIGUCHI
HO.MIWA
20190305
20060427
20060427
20060427
20060427
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
STORAGE TEMPERATURE RANGE SHOWS STORAGE CONDITION
FOR UNUSED PRODUCTS INCLUDING PACKING MATERIALS.
FOLLOW THE OPERATING TEMPERATURE RANGE FOR STORAGE
CONDITION AFTER MOUNTING.
3
HO.MIWA
SJ.SHIMIZU
SJ.SHIMIZU
Unless otherwise specified, refer to JIS C 5402.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
CODE NO.
ELC4-122760-03
TM21R-5C-88-LP(50)
CL222-2892-0-50
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
3
△
1/1
FORM HD0011-2-1