APPLICABLE STANDARD
TIA / EIA – 568 – B.2 CAT5e CAT6 (REQUIREMENTS FOR BASIIC LINK CONFIGURATION)
OPERATING
STORAGE
1
-25 C TO +60 C
2
-25 C TO +60 C
TEMPERATURE RANGE
RATING
TEMPERATURE RANGE
125 V AC
1 A
VOLTAGE
CURRENT
SPECIFICATIONS
TEST METHOD
ITEM
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION
VISUALLY AND BY MEASURING INSTRUMENT.
CONFIRMED VISUALLY.
ACCORDING TO DRAWING.
X
X
X
X
MARKING
ELECTRIC CHARACTERISTICS
50 m MAX.
CONTACT RESISTANCE
100 mA MAX (DC OR 1000 Hz).
X
X
(CABLE CONDUCTOR RESISTANCE IS NOT INCLUDED.)
100 V DC.
INSULATION RESISTANCE
100 M MIN.
X
X
X
X
VOLTAGE PROOF
500 V AC FOR 1 min.
NO FLASHOVER OR BREAKDOWN.
(CONTACT TO CONTACT)
NEAR END CROSSTALK
(NEXT) VOSS
MEASURED MINIMUM NEXT LOSS FOR EACH.
PAIR COMBINATION AT 100 Hz.
35.28 dB MIN
X
-
PATCH CORD TEST 0.5m.
MECHANICAL CHARACTERISTICS
MECHANICAL OPERATION
750 TIMES INSERTIONS AND EXTRACTIONS.
1)CONTACT RESISTANCE: 70 m MAX.
2)NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
X
X
X
-
-
-
VIBRATION
1 CYCLE: FREQUENCY 10 → 55 → 10 Hz,
SINGLE AMPLITUDE 0.75 mm, 1 OCTAVE 1 MINUTE
TEST FOR 10 CYCLE EACH IN 3 DIRECTIONS.
490 m/s2 DURATION OF PULSE 11 ms
AT 3 TIMES FOR 6 DIRECTIONS.
1)NO ELECTRICAL DISCONTINUITY OF 5 s.
2)NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
SHOCK
ENVIRONMENTAL CHARACTERISTICS
DAMP HEAT
EXPOSED AT +40 C, 90 ~ 95 , 500 h.
1)CONTACT RESISTANCE: 70 m MAX.
2)INSULATION RESISTANCE:
1 M MIN. (AT HIGH HUMIDITY)
10 M MIN. (AT DRY)
X
-
(STEADY STATE)
3)NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
RAPID CHANGE OF
TEMPERATURE
TEMPERATURE -55±3→5~35→85±2→5~35 C
1)CONTACT RESISTANCE: 70 m MAX.
2)INSULATION RESISTANCE: 100 M MIN.
3)NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
X
X
-
-
TIME
30 → 5MAX→ 30 →5MAX min
UNDER 5 CYCLES.
CORROSION SALT MIST
EXPOSED IN 5 % SALT WATER SPRAY FOR 48 h.
1)CONTACT RESISTANCE: 70 m MAX.
2)NO HEAVY CORROSION.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
KIM JAEHYEON
CHECKED
DATE
△
3
3
DIS-E-00002932
TU.TANIGUCHI
YH.ENAMI
20200403
20080311
20080311
20080311
20080311
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
THE OPERATION TEMPERATURE INCLUDES THE
RISE BY CURRENT CARRYING.
PACKING MATERIAL IS NOT INCLUDED.
1
HK.TANAKA
MT.ITANO
2
Unless otherwise specified, refer to IEC 60512.
MT.ITANO
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
ELC-125383-61-03
DRAWING NO.
PART NO.
CODE NO.
TM21DP-TM-88P(61)
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
3
△
1/1
CL222-2941-3-61
FORM HD0011-2-1