APPLICABLE STANDARD
OPERATING
STORAGE
TEMPERATURE RANGE
1
-55 C TO 85 C
-25 C TO 60 C
TEMPERATURE RANGE
RATING
VOLTAGE
125 V AC
CURRENT
0.5 A
SPECIFICATIONS
TEST METHOD
ITEM
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION
VISUALLY AND BY MEASURING INSTRUMENT.
CONFIRMED VISUALLY.
ACCORDING TO DRAWING.
X
X
X
X
MARKING
ELECTRIC CHARACTERISTICS
230 m MAX.
CONTACT RESISTANCE
100 mA MAX (DC OR 1000 Hz).
X
X
MEASUREMENT POINT
100 mm
PLUG
MODULAR CABLE
RECEPTACLE
(ONE EXAMPLE OF CONNECTOR CONFIGURTION
IS SHOW N.)
100 V DC.
INSULATION RESISTANCE
VOLTAGE PROOF
100 M MIN.
NO FLASHOVER OR BREAKDOWN.
X
X
X
X
500 V AC FOR 1 min.
MECHANICAL CHARACTERISTICS
MECHANICAL OPERATION
200 TIMES INSERTIONS AND EXTRACTIONS.
1) CONTACT RESISTANCE:
250 m MAX.
-
-
-
X
X
X
2) NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
VIBRATION
FREQUENCY 10 TO 55 Hz
1) NO ELECTRICAL DISCONTINUITY OF 5 s.
2) CONTACT RESISTANCE: 250 m MAX.
3) NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
SINGLE AMPLITUDE 0.75 mm,
AT 2 h FOR 3 DIRECTIONS.
SHOCK
490 m/s2 DURATION OF PULSE 11 ms
AT 3 TIMES FOR 3 DIRECTIONS.
ENVIRONMENTAL CHARACTERISTICS
DAMP HEAT
EXPOSED AT 40 C, 90 TO 95 , 500 h.
1) CONTACT RESISTANCE:
2) INSULATION RESISTANCE:
250 m MAX.
-
-
X
(STEADY STATE)
1 M MIN. (AT HIGH HUMIDITY)
10 M MIN. (AT DRY)
3) NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
RAPID CHANGE OF
TEMPERATURE
TEMPERATURE -55±3→5 TO 35→85±2→5 TO 35℃
1) CONTACT RESISTANCE:
250 m MAX.
X
TIME
30 TO 35→5 MAX→30 TO 35→5 MAX min
2) INSULATION RESISTANCE: 100 M MIN.
3) NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
UNDER 5 CYCLES.
CORROSION SALT MIST
EXPOSED IN 5 % SALT WATER SPRAY FOR 48 h.
1) CONTACT RESISTANCE:
2) NO HEAVY CORROSION.
250 m MAX.
-
-
-
X
X
X
RESISTANCE TO
SOLDERING HEAT
SOLDERABILITY
SOLDER TEMPERATURE, 260 ± 5 C FOR IMMERSION,
DURATION 10 ± 1 S.
NO DEFORMATION OF CASE AND EXCESSIVE
LOOSENESS OF THE TERMINALS.
SOLDERED AT SOLDER TEMPERATURE, 245 ± 2 C
FOR IMMERSION, DURATION 3 ± 1 S.
95 % OF SOLDER IMMERSED AREA
SHALL BE COVERED NEW SOLDER COATING.
① THE PRODUCT PERFORMANCE IS GUARANTEED ONLY IN THE
TEMPERATURE ADEQUATE TO PEOPLE’S ACTIVITIES.
② THE OPERATION TEMPERATURE INCLUDES THE
RISE BY CURRENT CARRYING.
1
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
△
0
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
MN.KENJO
TU.TANIGUCHI
HY.MATSUDA
20201120
20201120
20201120
20201120
Unless otherwise specified, refer to IEC 60512.
DS.HIROWATARI
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
ELC-120188-40-00
PART NO.
CODE NO.
TM11R-5L-3232(40)
CL0222-2720-4-40
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
0
△
1/1
FORM HD0011-2-1