TLV2702
TLV2704
SLOS340B – DECEMBER 2000 – REVISED AUGUST 2001
FAMILY OF NANOPOWER OPERATIONAL AMPLIFIERS AND
PUSH-PULL COMPARATORS
The TLV270x’s low supply current is coupled with
FEATURES
extremely low input bias currents enabling them to be
used with mega-ohm resistors making them ideal for
portable, long active life, applications. DC accuracy is
ensured with a low typical offset voltage as low as
390µV, CMRR of 90 dB, and minimum open loop gain
of 130 V/mV at 2.7 V.
D
Micro-Power Operation . . . 1.4 µA
Input Common-Mode Range Exceeds the
Rails . . . –0.1 V to V + 5 V
D
CC
D
D
D
D
Supply Voltage Range . . . 2.5 V to 16 V
Rail-to-Rail Input/Output (Amplifier)
Reverse Battery Protection Up to 18 V
The maximum recommended supply voltage is as high
as 16 V and ensured operation down to 2.5 V, with
electrical characteristics specified at 2.7 V, 5 V, and
15 V. The 2.5-V operation makes it compatible with
Li-Ion battery-powered systems and many micro-power
microcontrollersavailabletodayincludingTI’sMSP430.
Gain Bandwidth Product . . . 5.5 kHz
(Amplifier)
D
Push-Pull CMOS Output Stage (Comparator)
Specified Temperature Range
D
– T = –40°C to 125°C . . . Industrial Grade
A
All members are available in PDIP and SOIC with the
duals, one op-amp and one comparator, in the small
MSOP package and quads, two operational amplifiers
and two comparators, in the TSSOP package.
D
D
Ultrasmall Packaging
– 8-Pin MSOP (TLV2702)
Universal Op-Amp EVM (See the SLOU060 For
More Information)
–
+
APPLICATIONS
D
D
D
Portable Battery Monitoring
Consumer Medical Electronics
Security Detection Systems
SUPPLY CURRENT
vs
DESCRIPTION
SUPPLY VOLTAGE
2.5
The TLV270x combines sub-micropower operational
amplifier and comparator into a single package that
produces excellent micropower signal conditioning with
only 1.4 µA of supply current. This combination gives
thedesignermoreboardspaceandreducespartcounts
in systems that require an operational amplifier and
comparator. The low supply current makes it an ideal
choice for battery powered portable applications where
quiescent current is the primary concern. Reverse
battery protection guards the amplifier from an
over-current condition due to improper battery
installation. For harsh environments, the inputs can be
taken 5 V above the positive supply rail without damage
to the device.
2.25
2
1.75
1.5
1.25
1
Op Amp
0.75
V = V /2
I
CC
Comparator
0.5
V
T
= –1 V
= 25°C
ID
A
0.25
0
2
4
6
8
10 12 14
0
16
V
– Supply Voltage – V
CC
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright 2001, Texas Instruments Incorporated
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
www.ti.com