5秒后页面跳转
捷配首页

Datasheet > 转换器 > 模数转换器> TLV2544QDREP
TLV2544QDREP PDF预览

TLV2544QDREP

更新时间： 2024-11-23 13:14:51
品牌 Logo 应用领域
德州仪器 - TI 转换器
页数 文件大小 规格书
39页 648K
描述
IC 4-CH 12-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDSO16, GREEN, PLASTIC, SOIC-16, Analog to Digital Converter

阅读下载

中文翻译

获取价格

TLV2544QDREP 技术参数

生命周期：Obsolete零件包装代码：SOIC
包装说明：SOP,针数：16
Reach Compliance Code：unknownECCN代码：EAR99
HTS代码：8542.39.00.01风险等级：5.1
最大模拟输入电压：5.5 V最小模拟输入电压：
最长转换时间：4.65 µs转换器类型：ADC, SUCCESSIVE APPROXIMATION
JESD-30 代码：R-PDSO-G16JESD-609代码：e4
长度：9.9 mm最大线性误差 (EL)：0.0293%
模拟输入通道数量：4位数：12
功能数量：1端子数量：16
最高工作温度：125 °C最低工作温度：-40 °C
输出位码：BINARY输出格式：SERIAL
封装主体材料：PLASTIC/EPOXY封装代码：SOP
封装形状：RECTANGULAR封装形式：SMALL OUTLINE
认证状态：Not Qualified采样速率：0.2 MHz
采样并保持/跟踪并保持：SAMPLE座面最大高度：1.75 mm
标称供电电压：3.3 V表面贴装：YES
技术：CMOS温度等级：AUTOMOTIVE
端子面层：NICKEL PALLADIUM GOLD端子形式：GULL WING
端子节距：1.27 mm端子位置：DUAL
宽度：3.9 mmBase Number Matches：1

TLV2544QDREP 数据手册

 浏览型号TLV2544QDREP的Datasheet PDF文件第2页浏览型号TLV2544QDREP的Datasheet PDF文件第3页浏览型号TLV2544QDREP的Datasheet PDF文件第4页浏览型号TLV2544QDREP的Datasheet PDF文件第5页浏览型号TLV2544QDREP的Datasheet PDF文件第6页浏览型号TLV2544QDREP的Datasheet PDF文件第7页 
TLV2544, TLV2548  
2.7 V TO 5.5 V, 12-BIT, 200 KSPS, 4/8 CHANNEL, LOW POWER,  
SERIAL ANALOG-TO-DIGITAL CONVERTERS WITH AUTO POWER DOWN  
SLAS198A –FEBRUARY 1999– REVISED AUGUST 1999  
Maximum Throughput 200 KSPS  
Analog Input Range 0 V to Supply Voltage  
with 500 kHz BW  
Built-In Reference, Conversion Clock and  
8× FIFO  
Hardware Controlled and Programmable  
Sampling Period  
Differential/Integral Nonlinearity Error:  
±1 LSB  
Low Operating Current (1 mA at 2.7 V,  
1.2 mA at 5.5 V External Ref,  
1.6 mA at 2.7 V,  
Signal-to-Noise and Distortion Ratio:  
69 dB, f = 12 kHz  
i
2.1 mA at 5.5 V, Internal Ref)  
Spurious Free Dynamic Range: 75 dB,  
Power Down: Software/Hardware  
Power-Down Mode (1 µA Max, Ext Ref),  
Auto Power-Down Mode (1 µA, Ext Ref)  
f = 12 kHz  
i
SPI/DSP-Compatible Serial Interfaces With  
SCLK up to 20 MHz  
Programmable Auto-Channel Sweep  
Single Wide Range Supply 2.7 Vdc to  
5.5 Vdc  
D OR PW PACKAGE  
(TOP VIEW)  
DW OR PW PACKAGE  
(TOP VIEW)  
1
2
3
4
5
6
7
8
9
10  
20 CS  
SDO  
SDI  
CS  
SDO  
SDI  
1
2
3
4
5
6
7
8
16  
15  
14  
13  
12  
11  
19  
18  
17  
16  
15  
14  
13  
12  
11  
REFP  
REFM  
FS  
REFP  
REFM  
FS  
SCLK  
SCLK  
EOC/(INT)  
EOC/(INT)  
V
PWDN  
GND  
V
PWDN  
GND  
CSTART  
A7  
CC  
CC  
A0  
A1  
A2  
A0  
A1  
A2  
A3  
A4  
10 CSTART  
A3  
9
A6  
A5  
description  
The TLV2548 and TLV2544 are a family of high performance, 12-bit low power, 3.6 µs, CMOS analog-to-digital  
converters (ADC) which operate from a single 2.7 V to 5.5 V power supply. These devices have three digital  
inputs and a 3-state output [chip select (CS), serial input-output clock (SCLK), serial data input (SDI) and serial  
data output (SDO)] that provide a direct 4-wire interface to the serial port of most popular host microprocessors  
(SPI interface). When interfaced with a DSP, a frame sync (FS) signal is used to indicate the start of a serial data  
frame.  
In addition to a high-speed A/D converter and versatile control capability, these devices have an on-chip analog  
multiplexer that can select any analog inputs or one of three internal self-test voltages. The sample-and-hold  
function is automatically started after the fourth SCLK edge (normal sampling) or can be controlled by a special  
pin, CSTART, to extend the sampling period (extended sampling). The normal sampling period can also be  
programmed as short (12 SCLKs) or as long (24 SCLKs) to accommodate faster SCLK operation popular  
among high-performance signal processors. The TLV2548 and TLV2544 are designed to operate with very low  
power consumption. The power-saving feature is further enhanced with software/hardware/auto power down  
modes and programmable conversion speeds. The conversion clock (OSC) and reference are built-in. The  
converter can use the external SCLK as the source of the conversion clock to achieve higher (up to 3.6 µs when  
a 20 MHz SCLK is used) conversion speed. Two different internal reference voltages are available. An optional  
external reference can also be used to achieve maximum flexibility.  
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of  
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.  
Copyright 1999, Texas Instruments Incorporated  
PRODUCTION DATA information is current as of publication date.  
Products conform to specifications per the terms of Texas Instruments  
standard warranty. Production processing does not necessarily include  
testing of all parameters.  
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265  
1234567...39

中文翻译

下载PDF

与TLV2544QDREP相关器件

型号 品牌 获取价格 描述 数据表
TLV2544QDRG4 TI

获取价格

 		3-V TO 5.5-V, 12-BIT, 200-KSPS, 4-/8-CHANNEL, LOW-POWER SERIAL ANALOG-TO-DIGITAL CONVERTER
TLV2545 TI

获取价格

 		2.7 V TO 5.5 V, LOW POWER, 12-BIT, 200 KSPS, SERIAL ANALOG-TO-DIGITAL CONVERTERS WITH AUTO
TLV2545CDGK TI

获取价格

 		2.7 V TO 5.5 V, LOW POWER, 12-BIT, 200 KSPS, SERIAL ANALOG-TO-DIGITAL CONVERTERS WITH AUTO
TLV2545CDGKG4 TI

获取价格

 		2.7-V TO 5.5-V, LOW-POWER, 12-BIT, 140/200 KSPS, SERIAL ANALOG-TO-DIGITAL CONVERTERS WITH
TLV2545CDGKR TI

获取价格

 		1-CH 12-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDSO8, GREEN, PLASTIC, MSOP-8
TLV2545ID TI

获取价格

 		2.7 V TO 5.5 V, LOW POWER, 12-BIT, 200 KSPS, SERIAL ANALOG-TO-DIGITAL CONVERTERS WITH AUTO
TLV2545IDG4 TI

获取价格

 		2.7-V TO 5.5-V, LOW-POWER, 12-BIT, 140/200 KSPS, SERIAL ANALOG-TO-DIGITAL CONVERTERS WITH
TLV2545IDGK TI

获取价格

 		2.7 V TO 5.5 V, LOW POWER, 12-BIT, 200 KSPS, SERIAL ANALOG-TO-DIGITAL CONVERTERS WITH AUTO
TLV2545IDGKG4 TI

获取价格

 		2.7-V TO 5.5-V, LOW-POWER, 12-BIT, 140/200 KSPS, SERIAL ANALOG-TO-DIGITAL CONVERTERS WITH
TLV2545IDGKR TI

获取价格

 		1-CH 12-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDSO8, GREEN, PLASTIC, MSOP-8

与TLV2544QDREP相关文章

您还可以找


热门产品
PCB打样/小批量
铝基板
BOM智能配单
PCBA制造
钣金
精密CNC
模具注塑
薄膜开关
精选活动
PCBA打样特惠
四六层板品质升级
铝基板品质升级
一体化电子制造
DFM下载
服务支持
企业认证
产品展示
工厂展示
工艺能力
积分商城
关于捷配
捷配简介
企业文化
公司动态
人才招聘
联系我们
帮助中心
下单流程
付款流程
开票流程
常见问题
全球PCB制造服务专线 400-613-0088

工作时间：9:00-21:00

CEO邮箱：ceo@jiepei.com

投诉邮箱：tousu@jiepei.com

捷配网-微信公众号 微信公众号
捷配网-微信公众号 抖音公众号
资质认证：
合作快递：
支付方式：
Copyright © 2024 Jiepei.com Inc. All Rights Reserved. 版权所有:杭州捷配信息科技有限公司 浙公网安备 33010502006866号 浙ICP备10014259号-119 营业执照ICP证