TLV2302, TLV2304
FAMILY OF NANOPOWER OPERATIONAL AMPLIFIERS
AND OPEN DRAIN COMPARATORS
SLOS343 – DECEMBER 2000
Micro-Power Operation . . . 1.4 µA
Input Common-Mode Range Exceeds the
Rails . . . –0.1 V to V + 5 V
–
CC
+
Supply Voltage Range . . . 2.5 V to 16 V
Rail-to-Rail Input/Output (Amplifier)
Reverse Battery Protection Up to 18 V
SUPPLY CURRENT
vs
Gain Bandwidth Product . . . 5.5 kHz
(Amplifier)
SUPPLY VOLTAGE
2.5
2.25
Open-Drain CMOS Output Stage
(Comparator)
2
1.75
Specified Temperature Range
1.5
– T = –40°C to 125°C . . . Industrial Grade
A
1.25
Ultrasmall Packaging
– 8-Pin MSOP (TLV2302)
1
Op Amp
V = V /2
I
CC
0.75
Comparator
V
R
T
A
= –1 V
= 1MΩ (pullup to V
= 25°C
Universal Op-Amp EVM (See the SLOU060
for More Information)
ID
p
0.5
)
CC
0.25
0
2
4
6
8
10 12 14
0
16
V
– Supply Voltage – V
CC
The TLV230x combines sub-micropower operational amplifier and comparator into a single package that
produces excellent micropower signal conditioning with only 1.4 µA of supply current. This combination gives
the designer more board space and reduces part counts in systems that require an operational amplifier and
comparator. The low supply current makes it an ideal choice for battery-powered portable applications where
quiescent current is the primary concern. Reverse battery protection guards the amplifier from an over-current
condition due to improper battery installation. For harsh environments, the inputs can be taken 5 V above the
positive supply rail without damage to the device.
The TLV230x’s low supply current is coupled with extremely low input bias currents enabling them to be used
with mega-ohm resistors making them ideal for portable, long active life, applications. DC accuracy is ensured
with a low typical offset voltage as low as 390 µV, CMRR of 90 dB and minimum open loop gain of 130 V/mV
at 2.7 V.
The maximum recommended supply voltage is as high as 16 V and ensured operation down to 2.5 V, with
electrical characteristics specified at 2.7 V, 5 V, and 15 V. The 2.5-V operation makes it compatible with Li-Ion
battery-powered systems and many micropower microcontrollers available today including TI’s MSP430.
All members are available in PDIP and SOIC with the duals (one op-amp and one comparator) in the small
MSOP package, and the quads (two operational amplifiers and two comparators) in the TSSOP package.
†
A SELECTION OF OUTPUT COMPARATORS
V
(V)
V
I
/Ch
GBW
(kHz)
SR
(V/µs)
t
t
t
f
RAIL-TO-
RAIL
OUTPUT
STAGE
CC
IO
CC
(µA)
PLH
PHL
DEVICE
(µV)
390
390
390
600
250
250
(µs)
55
55
—
(µs)
30
30
—
(µs)
‡
TLV230x
TLV270x
TLV240x
TLV224x
TLV340x
TLV370x
2.5 – 16
2.5 – 16
2.5 – 16
2.5 – 12
2.5 – 16
2.5 – 16
1.4
1.4
5.5
5.5
5.5
5.5
—
0.0025
0.0025
0.0025
0.002
—
5
I/O
I/O
I/O
I/O
I
OD
PP
—
‡
5
880
1
—
—
5
—
—
—
0.47
0.47
55
55
30
30
OD
PP
—
—
5
I
†
‡
All specifications are typical values measured at 5 V.
is specified as one op-amp and one comparator.
I
CC
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 2000, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265