TLP2770
Photocouplers GaAℓAs Infrared LED & Photo IC
TLP2770
1. Applications
•
•
•
Programmable Logic Controllers (PLCs)
Battery Management System (BMS)
Industrial Inverters
2. General
The TLP2770 is a 20-Mbps low-power photocoupler in the small SO6L package.
It is housed in a thin SO6L package of 2.3 mm (max). The TLP2770 has guaranteed the isolation voltage 5 kVrms
and compliant with international safety standards for reinforced insulation.
The TLP2770 consumes supply current (IDDL/IDDH) of only 0.4 mA maximum over the entire operating
temperature range of -40 to 125 and operates at a supply voltage as low as 2.7 V, contributing to a reduction
in power consumption of various systems.
The input forward current can be less than 1 mA maximum, allowing direct drive by a microcontroller.
The detector has a totem-pole output stage with current sourcing and sinking capabilities. The TLP2770 has an
internal Faraday shield that provides a guaranteed common-mode transient immunity of ±20 kV/µs.
3. Features
(1) Package: SO6L
(2) Data transfer rate: 20 MBd (typ.) (NRZ)
(3) Supply current: 0.4 mA (max)
(4) Threshold input current: 1 mA (max)
(5) Supply voltage: 2.7 to 5.5 V
(6) Operating temperature: -40 to 125
(7) Propagation delay time: tpHL/tpLH = 60 ns (max)
(8) Pulse width distortion: |tpHL-tpLH| = 25 ns (max)
(9) Isolation voltage: 5000 Vrms (min)
(10) Safety standards
UL-approved: UL1577, File No.E67349
cUL-approved: CSA Component Acceptance Service No.5A File No.E67349
VDE-approved: EN60747-5-5, EN60065, EN60950-1, EN 62368-1 (Note 1)
Note 1: When a VDE approved type is needed, please designate the Option (D4).
Start of commercial production
2016-08
©2016-2017
2017-11-15
Rev.2.0
1
Toshiba Electronic Devices & Storage Corporation