TLE9350BSJ
High speed CAN FD transceiver
Features
•
•
•
Fully compliant to ISO 11898-2:2016 and SAE J2284-4/-5
Loop delay symmetry for CAN FD data frames up to 5 Mbit/s
Very low electromagnetic emission (EME) allows the use without
additional common mode choke
•
•
•
•
•
•
•
Excellent ESD robustness
TxD timeout function
Very low CAN bus leakage current in power-down state
Overtemperature protection
Protected against automotive transients according to ISO 7637 and SAE J2962-2
Receive-only mode and power-save mode
Green Product (RoHS compliant)
Potential applications
•
•
•
•
Engine control units (ECU)
Electric power steering
Transmission control units (TCUs)
Chassis control modules
Product validation
Qualified for automotive applications. Product validation according to AEC-Q100.
Description
The TLE9350BSJ is a high speed CAN transceiver, used in HS CAN systems for automotive applications as well
as for industrial applications. It is designed to fulfill the requirements of ISO 11898-2:2016 physical layer
specification as well as SAE J1939 and SAE J2284.
The TLE9350BSJ is available in a RoHS compliant, halogen free PG-DSO-8 package.
As an interface between the physical bus layer and the HS CAN protocol controller, the TLE9350BSJ is
designed to protect the microcontroller against interferences generated inside the network. A very high ESD
robustness and the optimized RF immunity allows the use in automotive applications without additional
protection devices, such as suppressor diodes or common mode chokes.
Datasheet
Rev. 1.0
2023-08-11
www.infineon.com/automotive-transceivers
1