Hex-Half-Bridge / Double Six-Driver
Data Sheet
TLE 6208-6 G
SPT 4
1
Overview
1.1
Features
• Six High-Side and six Low-Side-Drivers
• Free configurable as switch, halfbridge or H-bridge
• Optimized for DC motor management applications
• 0.6 A continuous (1 A peak) current per switch
• RDS ON; typ. 0.8 Ω, @ 25 °C per switch
• Outputs fully short circuit protected with diagnosis
• Overtemperature-Protection with hysteresis
and diagnosis
P-DSO-28-6
Enhanced Power
• Temperature prewarning
• Standard SPI-Interface
• Very low current consumption (typ. 10 µA, @ 25 °C)
in stand-by (Inhibit) mode
• Over- and Undervoltage-Lockout
• CMOS/TTL compatible inputs with hysteresis
• Internal clamp diodes
• Enhanced power P-DSO-Package
Type
Ordering Code
Package
TLE 6208-6 G
Q67007-A9462
P-DSO-28-6
Functional Description
The TLE 6208-6 G is a fully protected Hex-Half-Bridge-Driver designed specifically for
automotive and industrial motion control applications. The part is based on Infineons
Smart Power Technology SPT® which allows bipolar and CMOS control circuitry in
accordance with DMOS power devices existing on the same monolithic circuitry. The six
low and high side drivers are freely configurable and can be controlled separately.
Therefore all kind of loads can be combined. In motion control up to 5 actuators (DC-
Motors) can be connected to the 6 halfbridge-outputs (cascade configuration). Operation
modes forward (cw), reverse (ccw), brake and high impedance are controlled from a
standard SPI-Interface. The possibility to control the outputs via software from a central
logic, allows limiting the power dissipation. So the standard P-DSO-28-6-package meets
the application requirements and saves PCB-Board-space and cost.
Furthermore the build-in features like Over- and Undervoltage-Lockout, Over-
Temperature-Protection and the very low quiescent current in stand-by mode opens a
wide range of automotive- and industrial-applications.
Data Sheet
1
2001-11-15