TLC555-DIE
www.ti.com
SLFS079 –JULY 2012
LinCMOS™ TIMER
1
FEATURES
2
•
•
•
•
•
Very Low Power Consumption
•
•
•
Functionally Interchangeable With the NE555;
Has Same Pinout
Capable of Operation in Astable Mode
CMOS Output Capable of Swinging Rail to Rail
High Output-Current Capability
ESD Protection Exceeds 2000 V Per
MIL-STD-883C, Method 3015.2
Available in Q-Temp Automotive
Output Fully Compatible With CMOS, TTL, and
MOS
–
–
–
High Reliability Automotive Applications
Configuration Control/Print Support
Qualification to Automotive Standards
•
•
Low Supply Current Reduces Spikes During
Output Transitions
Single-Supply Operation From 2 V to 15 V
DESCRIPTION
The TLC555 is a monolithic timing circuit fabricated using the TI LinCMOS process. The timer is fully compatible
with CMOS, TTL, and MOS logic and operates at frequencies up to 2 MHz. Because of its high input impedance,
this device uses smaller timing capacitors than those used by the NE555. As a result, more accurate time delays
and oscillations are possible. Power consumption is low across the full range of power supply voltage.
Like the NE555, the TLC555 has a trigger level equal to approximately one-third of the supply voltage and a
threshold level equal to approximately two-thirds of the supply voltage. These levels can be altered by use of the
control voltage terminal (CONT). When the trigger input (TRIG) falls below the trigger level, the flip-flop is set and
the output goes high. If TRIG is above the trigger level and the threshold input (THRES) is above the threshold
level, the flip-flop is reset and the output is low. The reset input (RESET) can override all other inputs and can be
used to initiate a new timing cycle. If RESET is low, the flip-flop is reset and the output is low. Whenever the
output is low, a low-impedance path is provided between the discharge terminal (DISCH) and GND. All unused
inputs should be tied to an appropriate logic level to prevent false triggering.
While the CMOS output is capable of sinking over 100 mA and sourcing over 10 mA, the TLC555 exhibits greatly
reduced supply-current spikes during output transitions. This minimizes the need for the large decoupling
capacitors required by the NE555.
ORDERING INFORMATION(1)
PACKAGE
DESIGNATOR
PRODUCT
PACKAGE
ORDERABLE PART NUMBER
PACKAGE QUANTITY
TLC555TDF1
TLC555TDF2
210
10
TLC555
TD
Bare die in waffle pack(2)
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
(2) Processing is per the Texas Instruments commercial production baseline and is in compliance with the Texas Instruments Quality
Control System in effect at the time of manufacture. Electrical screening consists of DC parametric and functional testing at room
temperature only. Unless otherwise specified by Texas Instruments AC performance and performance over temperature is not
warranted. Visual Inspection is performed in accordance with MIL-STD-883 Test Method 2010 Condition B at 75X minimum.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
LinCMOS is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2012, Texas Instruments Incorporated
5秒后页面跳转
摩尔斯微电子在美国约书亚树国家公园测试 Wi-Fi HaLow
贸泽上架Tallysman TW5386智能GNSS天线
SL74HC10N：高性能三输入与非门解析
AIC1781A 电池充电控制器深度解析
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
